Meyer Sound UP4XP Ultra-Compact Powered Speaker
Meyer Sound UP4XP Ultra-Compact Powered Speaker
The UP-4XP ultracompact loudspeaker, with IntelligentDC technology, is ideally suited for applications requiring a small, inconspicuous cabinet that also delivers high sound pressure levels, low distortion, and uniform directional control. The selfpowered UP-4XP offers exceptional audio performance in a compact package with the advantages of a remote power supply. As a standalone loudspeaker, the UP-4XP can be used for vocal reinforcement, frontfill coverage, and delay coverage for underbalcony applications. The UP-4XP can also be paired with an optional subwoofer to create a full-range system.
Features:
- Extraordinary fidelity and power capability come in an ultra compact package
- Metal dome tweeter delivers a smooth high-frequency response
- Wide, symmetrical pattern covers a broad listening area
- Unique crossover design eliminates combing and yields a consistent midrange response
- Exceptional SPL to size ratio provides flexibility
- Supports long cable runs with light-gauge cables
Specifications:
- Acoustic
- Operating Frequency Range: 66Hz – 18kHz
- Frequency Response: 72Hz – 17.5kHz ±4dB
- Phase Response: 360Hz – 12kHz ±45°
- Linear Peak SPL: 117.5dB with crest factor >17dB (M-noise), 111dB (Pink noise), 114.5dB (B-noise)
- Coverage
- Horizontal Coverage: 100°
- Vertical Coverage: 100°
- Transducers
- Low Frequency: Two 4-inch low-frequency cone drivers
- High Frequency: One 1-inch metal dome tweeter
- Audio Input
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±5VDC
- Connectors: Phoenix or SwitchCraft EN3 5-pin male (two pins for 48VDC power, three pins for balanced audio)
- Input Impedance 10kΩ differential between positive (+) and negative (–) audio pins
- Wiring
- Pin 1: DC Power (-)
- Pin 2: DC Power (+)
- Pin 3: Audio Shield, Chassis/Earth
- Pin 4: Audio (-)
- Pin 5: Audio (+)
- Nominal Input Sensitivity –2.0dBV (0.8V rms) continuous average is typically the onset of limiting for noise and music
- Input Level Audio source must be capable of producing +16dBV (6.3V rms) into 600Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker
- Amplifier
- Type 3-channel, Class-D
- Total Output Power: 500W peak
- THD, IM, TIM < 0.02%
- Cooling: Convection
- DC Power
- Connector: Phoenix or SwitchCraft EN3 5-pin male (two pins for 48VDC power, three pins for balanced audio)
- Safety Rated Voltage 48VDC
- RMS Network (Optonal on required MPS-488HP Power Supply)
- Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator’s host computer.
- Physical
- Dimensions W: 13.84in (352mm) x H: 5.54in (141mm) x D: 5.25in (133mm)
- Weight: 12.2 lbs. (5.53kg)
- Enclosure: Premium multi-ply birch with slightly textured black finish
- Protective Grille: Powder-coated, hex-stamped steel with black mesh screen
- Rigging: Top and bottom plates available with 3/8”-16 or M10 threads nuts
