RME Fireface 802 24 60-Channel USB 2.0 or Firewire Audio Interface
RME Fireface 802 24 60-Channel USB 2.0 or Firewire Audio Interface
The Fireface 802 renews RME’s reputation built on the legendary Fireface 800. 60 channels of audio, high-end microphone preamps, reference class converters, a complete effects section and operation at up to 192 kHz are the base for many more features
Features:
- 30 Input / 30 Output channels
- 12 x Analog I/O
- 4 x Mic/Instrument preamps
- 1 x AES/EBU I/O
- 2 x ADAT I/O
- 1 x SPIDIF (Available through ADAT 2 port)
- 1 x Word Clock I/O
- 1 x MIDI I/O
- FireWire or USB operation
- TotalMix FX software with monitor management
- SteadyClock jitter suppression
- Intelligent Clock Control (ICC) retains sample rate in case of external clock failure
- DigiCheck software offers comprehensive tools for metering, testing, measuring and analyzing audio streams
- Stand-alone operation with setup recall
- Universal power supply ensures worldwide compatibility
Specifications
- AD, Line In 1-8, rear
- Resolution AD: 24 bit
- Signal to Noise ratio (SNR): 113 dB RMS unweighted, 116 dBA
- Frequency response @ 44.1 kHz, -0.1 dB: 5 Hz – 20.8 kHz
- Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 45.8 kHz
- Frequency response @ 192 kHz, -1 dB: 5 Hz – 92 kHz
- THD: < -110 dB, < 0.00032 %
- THD+N: < -104 dB, < 0.00063 %
- Channel separation: > 110 dB
- Input: 6.3 mm TRS jack, electronically balanced
- Input sensitivity: 8 kOhm unbalanced, 12 kOhm balanced
- Input sensitivity switchable to Lo Gain, +4 dBu, -10 dBV
- Input level for 0 dBFS @ Lo Gain: +19 dBu
- Input level for 0 dBFS @ +4 dBu: +13 dBu
- DA – Stereo Monitor Output Phones (9-12): As DA, but:
- Output: 6.3 mm TRS stereo jack, unbalanced
- Maximum output level at 0 dBFS, High: +16.8 dBu
- Maximum output level at 0 dBFS, Low: +2 dBV
- Output impedance: 30 Ohm
- AES/EBU: 2 x XLR, transformer-balanced, galvanically isolated, according to AES3-1992
- Microphone In 9-12, front: As AD, but:
- Input: XLR, electronically balanced
- Input impedance: 3.4 kOhm
- Signal to Noise ratio (SNR): 112 dB RMS unweighted, 116 dBA
- Gain range: 54 dB
- Maximum input level, Gain +6 dB: +10 dBu
- Instrument In 9-12, front: As AD, but:
- Input: 6.3 mm TS jack, unbalanced
- Input impedance: 800 kOhm
- Signal to Noise ratio (SNR): 112 dB RMS unweighted, 115 dBA
- Maximum input level, Gain +6 dB: +21 dBu
- DA, Line Out 1-8, rear:
- Dynamic range (DR): 115 dB RMS unweighted, 118 dBA
- Frequency response @ 44.1 kHz, -0.5 dB: 5 Hz – 20.8 kHz
- Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 45 kHz
- Frequency response @ 192 kHz, -1 dB: 5 Hz – 89 kHz
- THD: -110 dB, < 0.00032 %
- THD+N: -104 dB, < 0.00063 %
- Channel separation: > 110 dB
- Output: 6.3 mm TRS jack, servo-balanced
- Output impedance: 75 Ohm
- Output level switchable Hi Gain, +4 dBu, -10 dBV
- Output level at 0 dBFS @ Hi Gain: +19 dBu
- Output level at 0 dBFS @ +4 dBu: +13 dBu
- Output level at 0 dBFS @ -10 dBV: +2 dBV
- ADAT OPTICAL:
- 2 x TOSLINK I/O, format according to Alesis specification
- Standard: 2 x 8 channels 24 bit, up to 48 kHz
- Double Speed (S/MUX): 2 x 4 channels 24 bit 96 kHz
- Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192 kHz
- Quad Speed Windows USB: 1 x 2 channels 24 bit 192 kHz
- SPDIF OPTICAL (VIA ADAT2):
- 1 x optical, according to IEC 60958
- WORD CLOCK:
- BNC, switchable termination
