Barco HDF-W30 FLEX 30K DLP 16:10 Video Projector with Lens and Road Case – B Stock
Barco HDF-W30 FLEX 30K DLP 16:10 Video Projector with Lens and Road Case – B Stock
Projector may have no more than two of the following issues: Unsteady output, Output below manufacturer specs, color spill
Included lens is DC2K (1.2-1.8) Projector lens
Includes Road Case, Remote, 4 trigger clamps
Thanks to its high light output, the HDF-W30 FLEX offers impressive performance for large venues – even when there’s lots of ambient light. Designed for life on the road, the rugged and modular projector is easy to install and service. And when equipped with a rental frame, it can easily be stacked or rigged. Just like the RLM, HDX, HDF and FLM projector families, the HDF-W30 FLEX uses the TLD lens suite.
Stunning images for large screens: Geared with 3-chip DLP technology, single Xenon lamp illumination, and a high-contrast optical engine, the HDF-W30 FLEX makes no compromises on brightness, color accuracy, and stability. Its Xenon lamp color accuracy delivers the best performance required for premium large-screen projection. Plus, the projector’s also equipped with Barco’s cutting-edge ImagePRO technology for remarkable scaling power.
Choose your brightness: The HDF-W30 FLEX’s most remarkable benefit is that it offers FLEX brightness as standard. In this way rental companies have the flexibility to tune the projector’s brightness to a specific show – from 18,000 to 30,000 lumens in incremental steps of 2,000 lumens.
Low total cost of ownership: This projector produces its 30,000 lumens brightness with a single Xenon lamp. Compared to projectors with multiple lamps, managing the HDF-W30 FLEX is a breeze. Moreover, this not only makes it easier to align images during setup but servicing the projector and replacing the lamp also take less time – thus reducing total cost of ownership.
Features
- Ultra-bright, stunning images
- High-contrast 3-chip DLP™ engine
- WUXGA resolution (1,920 x 1,200)
- 30,000 center lumens
- Contrast ratio of 1,900:1
- Xenon illumination
- Standard FLEX brightness
- ImagePRO technology inside (Athena scaler)
- Dual-core warp engine
- Built for the rental & staging industry
- Fully sealed optics
- Extended wireless control options
- 3D ready
- Preview mode on LCD display
- Removable lamp house, power supply & electronics
- Extended warping and blending
- DMX-512 control
- Native 3G HDSDI/SDI input
- BarcoLink for progressive WUXGA 50/59.94/60 Hz signal distribution over a single BNC coax cable
- Low video delay (broadcast live events)
- Universal lamp house for all HDF projectors
- Easy to set up, install, service and transport thanks to modular design
- Low total cost of ownership
- Geared with a single Xenon lamp for easy projector management, setup and servicing
- Sealed engine with constant image quality over time
- Customer can replace bulb
- Power-saving mode
- TLD lens suite that is fully compatible with the Barco RLM, HDX, HDF and FLM projector series
Specifications
- Projector type
- WUXGA 3-chip DLP digital projector
- Technology
- 0.96″ DMD™ x3 sealed DLP core
- Resolution
- 1,920 x 1,200 – 16:10 aspect ratio
- Brightness
- 30,000 center lumens / 28,000 ANSI lumens*
- Contrast ratio
- 1,900:1 (standard) / 2,200:1 (high contrast mode)
- Brightness uniformity
- 0.9
- ScenergiX
- Horizontal and vertical edge blending
- Lenses
- TLD+ 0.73:1 ; 1.2:1 ; 0.8-1.16 ; 1.16-1.5:1 ; 1.5-2.0:1 ; 2.0-2.8:1 ; 2.8-4.5:1 ; 4.5-7.5:1 ; 7.5-11.5:1
- Optical lens shift
- V: -30% to +120% / H: -40% to +40% on zoom lenses (memorized)
- Color correction
- P7
- Lamps
- 4.0 kW xenon
- Lamp lifetime
- 600 Hrs
- Transport with lamp
- Yes
- Lamp house, quick replace
- Yes
- Customer bulb replace
- Yes
- Lamp warranty (field replace/ factory replace)
- 90 days, 500 hours / pro rata 500 hours
- Optical dowser
- Standard
- Picture-in-picture
- Two sources simultaneously
- Orientation
- table – ceiling – side (portrait)* – vertical / * lamp door down/bottom
- DMX 512
- standard
- WARP
- Direct adjust OSD + toolset
- Image processing
- Embedded warp & blend engine
- Keystone correction
- Yes
- Integrated web server
- Yes
- CLO (constant light output)
- Standard
- 3D
- Triple flash up to 200Hz/Optional: active eyewear, passive Infitec, passive circular
- Inputs
- DVI-I (HDCP including analog RGB YUV), SDI/HDSDI/Dual HDSDI/3G/BarcoLink
- Optional Inputs
- 5-BNC RGBHV (RGBS/RGsB, YUV CS/SOY, Composite video, S-Video); DVI-I (HDCP including analog RGB YUV) + BarcoLink/SDI/HDSDI/Dual HDSDI/3G; 3D active input (HDMI/DisplayPort) feat. SENSIO 3D
- Input resolutions
- From NTSC up to QXGA (2,048 x 1,536)
- Max. pixel clock
- 200 MHz
- Software tools
- Projector Toolset + Android app + iOS app
- Control
- XLR wired + IR, RS232, Wifi, GSM (opt)
- Network connection
- 10/100 base-T, RJ-45 connection, Wifi (optional)
- Power requirements
- 200-240V / 50-60Hz
- IEC 60309 / CeeForm Connector
- Max. power consumption
- 4,800W / STBY < 10W
- Noise level (typical at 25°C/77°F)
- 60dB(A)
- Operational ambient temperature
- 0-40°C / 32°-104°F
- Operational humidity
- 0-80% (non condens)
- Dissipation BTU
- Max. 16,378 BTU/h
- Dimensions (WxLxH)
- 707 x 1,025 x 548mm / 27.83 x 40.35 x 21.57 inches
- Weight
- 99kg (218.25lbs)
- Certifications
- UL60950-1 and EN60950-1,FCC rules & regulations,part 15 Class A and CE EN55022 Class A,RoHS
* +/- 10%
