Robe Tetra1 9x 40-Watt RGBW LED Linear Bar
Robe Tetra1 9x 40-Watt RGBW LED Linear Bar
TETRA1 is a linear bar built on the highly successful Spiider and Tarrantula technology. Despite its shorter length, TETRA1 maintains the same features, quality and pixel spacing as TETRA2.
Features:
- Light source – 9x 40W RGBW LED multichips
- Light output – 5.300 lm (integrating sphere)
- Zoom range – 4° – 45°
- Effects – 1x MCFE™ Multi-coloured Flower Effects (patented), Seamless Curtain of Light, Fast Paced Sweeping
Specifications:
- Source:
- Light source type: 9x 40W RGBW LED multichips
- LED life expectancy: min. 50.000 hours
- Typical lumen maintenance: L70/B50 @ 50.000 hours
- Optical System:
- Robe’s proprietary optical design
- Zoom range: 4°- 45°
- High efficient component optics
- Fixture total lumen output:
- 5.300 lm (integrating sphere)
- 4.225 lm (goniophotometer)
- Dynamic Effects and Features:
- Colour mixing mode RGBW or CMY
- Individual control of each RGBW pixel
- Variable CCT: 2.700K – 8.000K
- Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)
- DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K
- Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction
- 1x MCFE™ – Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patented)
- Motorized zoom
- Pre-programmed random strobe & pulse effects
- Electronic strobe effect with variable speed up to 20 Hz
- High resolution electronic dimming: 0 – 100%
- L3™ – (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
- Control and programming:
- Setting & Addressing: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 88 steps), built-in analyser for easy fault finding
- Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net
- REAP™ – Robe Ethernet Access Portal
- Wireless CRMX™ technology from Lumen Radio – on request
- DMX Protocol modes: 6
- Control channels: 25, 45, 59, 68, 72, 81
- RGBW / CMY: 8 or 16 bit
- Zoom: 8 or 16 bit
- Dimmer: 8 or 16 bit (internal 18 bit)
- Movement:
- Tilt movement: 191°
- 16 bit movement resolution
- Controllable speed of Tilt movement
- Thermal specification:
- Maximum ambient temperature: 40°C (104°F)
- Maximum surface temperature: 70°C (158°F)
- Minimum operating temperature: -5°C (23°F)
- Total heat dissipation: max. 1023 BTU/h (calculated)
- Electrical specification and connections:
- Power supply: Electronic auto-ranging
- Input voltage range: 100-240 V, 50/60 Hz
- Power consumption: max. 300 W
- Power in/out connector: Neutrik powerCON TRUE1 in/out
- DMX and RDM data in/out: Locking 5-pin XLR
- Ethernet port in/out: RJ45
- Embedded Ethernet switch 10/100 Mbps
- Mechanical specification:
- Height: 279 mm (10.98″) – head in vertical position
- Width: 508 mm (20”)
- Depth: 192 mm (7.56″) – head in horizontal position
- Weight: 11.3 kg (24.9 lbs)
- Ingress protection rating: IP20
- Rigging:
- Mounting points: 2 pairs of 1/4-turn locking points
- 2x Omega adaptors with 1/4-turn quick locks
- Universal operating position
- Safety cable attachment point
