Allen & Heath AH-DT168 16 Input x 8 Output Dante Audio Expander with dLive Preamps – 48kHz / 96kHz
Allen & Heath AH-DT168 16 Input x 8 Output Dante Audio Expander with dLive Preamps – 48kiloHertz / 96kiloHertz
The DT168 is a rugged, 96kHz portable expander for adding remote I/O to a Dante equipped dLive, Avantis, SQ, or AHM system.
Features:
- Dante audio expander (96kHz / 48kHz)
- Portable stagebox design
- 16 mic preamps on XLR with Phantom Power status LEDs
- 8 XLR Line Outs
- Primary and Secondary Dante ports with locking EtherCon
- Redundant or Switched mode
- Direct preamp control from dLive, Avantis, AHM-64 and SQ
- Remote control of preamps via DT Preamp Control software for integration with 3rd party systems
- Optional 19-inch rack mount kit available
- Rubber bumpers and carry handle
- AES67 compatible
- Dante Domain Manager ready
Specifications:
- Mic/Line XLR Inputs: Balanced XLR, +48V phantom power
- Mic/Line Preamp: Fully recallable
- Input Sensitivity: -60 to +15dBu
- Analogue Gain: +5 to +60dB, 1dB steps
- Pad: -20dB Active PAD
- Maximum Input Level: +30dBu (PAD in)
- Input Impedance: >4kΩ (Pad out), >10kΩ (Pad in)
- Mic/Line Channel noise: 22-22kHz, Direct Out @ unbalanced out
- Mic EIN: -127dB with 150Ω source
- Mic/Line Channel THD+N: 22-22kHz, Direct Out @ unbalanced out
- Analogue XLR Outputs: Balanced, Relay protected
- Output Impedance: <75Ω
- Nominal Output: +4dBu = 0dB meter reading
- Maximum Output Level: +22dBu
- Residual Output Noise: -92dBu (muted, 20-20kHz)
- Dante:
- Sample rate: 48kHz or 96kHz
- Bit Depth: 24 Bit
- Gain, Pad, 48v Control: Allen & Heath dLive, Avantis, AHM-64 or SQ system
- Operating Temperature Range: 0°C to 40°C (32°F to 104°F)
- Mains Power: 100-240V, 50/60 Hz, 40W max
- Dimensions and Weight (Width x Depth x Height x Weight): 410mm x 190mm x 185mm x 4.6kg (16.1” x 7.5” x 7.3” x 10.1lbs)
