D&B Audiotechnik xC-Series PA System for Small House of Worship with 16C / 24C White Column Speakers
D&B Audiotechnik xC-Series PA System for Small House of Worship with 16C / 24C White Column Speakers
The xC-Series column loudspeakers are designed for seamless integration into difficult acoustic and aesthetic environments. Flat and parallel mounting options create a discreet profile whilst a broad range of application requirements are addressed by steering dispersion down on to the listening plane. The xC-Series encompasses three column loudspeakers for deployment within permanently installed applications. While utilizing different driver configurations, all xC-Series cabinets and available accessories share the same unobtrusive design features and can be properly colour matched to interior designs. The combination of high vertical directivity and cardioid horizontal dispersion control minimizes reflections from behind the loudspeaker; reducing dispersion into the reverberant field and increasing gain before feedback, resulting in excellent speech intelligibility. Intended applications include houses of worship, conference and meeting facilities, auditoriums, ball rooms, town halls, parliaments, lecture theatres and assembly halls.
Specifications:
- 16C column loudspeakers (x2):
- System data:
- Frequency response (–5 dB standard): 110 Hz – 18 kHz
- Max. sound pressure (1 m, free field)1:
- with 5D/10D/30D/40D: 122 dB
- with D20/D80: 122 dB
- Loudspeaker data:
- Nominal impedance: 12 ohms
- Power handling capacity (RMS/peak 10 msec): 100/500 W
- Dispersion angle (h x v): 90° x 40°
- Components:
- 4 x 4″ driver with neodymium magnet
- 1 x 0.75″ compression driver mounted on CD horn
- Passive crossover network
- Connections:
- 4-pole Phoenix terminal
- 1 x NL4
- Weight: 5 kg (11 lb)
- System data:
- 24C column loudspeakers (x2):
- System data:
- Frequency response (–5 dB standard): 110 Hz – 17 kHz
- Frequency response (–5 dB CUT mode): 150 Hz – 17 kHz
- Max. sound pressure (1 m, free field)1:
- with 5D/10D/30D/40D: 126 dB
- with D20/D80: 126 dB
- Loudspeaker data:
- Nominal impedance: 12 ohms
- Power handling capacity (RMS/peak 10 msec): 125/600 W
- Dispersion angle (h x v): 90° x 20°
- Vertical aiming of LF/MF beam: ‒5°
- Vertical adjustment of HF section: 0° to ‒14°
- Components:
- 6 x 4″ driver with neodymium magnet
- 6 x 1.1″ dome tweeter mounted in vertical horn array
- Passive crossover network
- Connections:
- 4-pole Phoenix terminal
- 1 x NL4
- Weight: 9 kg (19.8 lb)
- System data:
- 5D Amplifier:
- Digital Signal Processing:
- Latency analog and digital inputs: 1.1 ms / < 3 ms
- Configurations: Selected loudspeakers from E-Series, xS-Series, xC Series, T-Series; Linear setup
- Frequency generator: Pink noise or Sine wave 10 Hz – 20 kHz
- Controls and indicators:
- Display: LED indicators
- Connectors:
- Ethernet, Dante Input: 2 x RJ 45, 1 Gbit / 100 Mbit GPI: 1 x 6-pin Euroblock 3.5 mm male Input / Link ANALOG (A1-A4): 2 x 6-pin Euroblock male, 3.5 mm Speaker outputs A/B/C/D: 2 x 4-pin Euroblock 5.08 mm female Mains connector: IEC FAULT: 1 x 3-pin Euroblock 3.5 mm male
- Power supply:
- Type: Wide range switched mode power supply with active Power Factor Correction (PFC)
- Rated mains voltage: 100 – 240 V, 50 – 60 Hz
- Dimensions / weight:
- Dimensions (H x W x D): 1 RU x 9.5″ x 435 mm/17.1″
- Weight:
- 4.6 kg
- 10 lb
- Digital Signal Processing:
- D&B Audiotechnik Z5440.000 Wall Mount Brackets (x5)
