Audio-Technica ATM350GL Instrument Condenser Microphone with Guitar Mount / 9-Inch Gooseneck
Audio-Technica ATM350GL Instrument Condenser Microphone with Guitar Mount / 9-Inch Gooseneck
Designed for use with guitars, the ATM350GL UniMount® mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument.
When teamed with the included AT8491G guitar mount and strong, flexible AT8490L 9″ gooseneck, the mic can be securely fastened to a guitar or other stringed instrument with a body depth of 90-135 mm. The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.
Features:
- Low-profile mic design for minimum visibility
- Crisp, clear, well-balanced microphone response, even at high SPLs
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- UniMount® guitar mount with thumbscrew-adjustable clamp attaches securely to guitars and other stringed instruments with body depths of 90-135 mm, and provides excellent shock resistance for the microphone
- Rugged UniMount® 9″ gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
- In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
- Interchangeable elements available for hypercardioid and omnidirectional polar patterns
- Included violin mount with hook-and-loop fastener provides an additional mounting option
Specifications:
- Headphones:
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 40 – 20,000 Hz
- Low Frequency Roll Off: 80 Hz, 12 dB/octave
- Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
- Maximum Input Sound Level: 159 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: 130 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11– 52V DC, 3.5 mA typical
- Switches: Flat, roll-off
- Weight:
- Microphone: 14.5 g (0.5 oz)
- Powermodule: 90 g (3.2 oz)
- Cable: 4.0 m (13.1′) long (permanently attached to microphone), 3.2 mm (0.13″) diameter, 2-conductor shielded cable with HIROSE HR10-type connector
- Dimensions:
- Microphone: 37.8 mm (1.49”) long, 12.2 mm (0.48”) maximum body diameter
- Powermodule: 92 mm (3.62″) long, 18.9 mm (0.74″) diameter
- Output Connector:
- Powermodule: Integral 3-pin XLRM-type
- Accessories Included:ATM350a cardioid condenser microphone; AT8543 power module; AT8491D UniMount® drum mount; AT8490 UniMount® 5″ gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case
