Martin VC-Dot 4 String-Based LED Dots RGB – 200 Millimeter Pitch – 64 Pieces – 2 Meter Lead-In
Martin VC-Dot 4 String-Based LED Dots RGB – 200 Millimeter Pitch – 64 Pieces – 2 Meter Lead-In
VC-Dot 4 is a lightweight string of individually controllable, bright Dots useful in creating customized LED video solutions with maximum artistic flexibility and a minimum of effort. Fully customizable and controllable via the award-winning P3 System Controller™ family and/or DMX512, it is a perfect solution for integrating LED video technology into façades, stage designs, ceilings or any other structure, indoors or out.
Mapping video onto VC-Dots goes quickly and intuitively via the P3 System Controller. No need for complex setups and time-consuming addressing. VC-Dot 4 contains four LEDs and is available in an RGB color mixing version.
Features:
- Flexible string-based direct-view LED lighting
- Perfect for façade or stage integration
- Individually controllable VC-dots
- Up to 64 VC-dots per string
- Customizable VC-dot pixel pitch and string length
- Calibrated brightness and colors for each VC-Dot
- P3 and RDM/DMX controllable
- Intuitive mapping and addressing via P3 System Controller family
- Efficient and long-lasting
- IP67 rated for permanent outdoor or indoor use
- Simple infrastructure via VC-Feeder and P3 PowerPort
- Great number of mounting options using clips, brackets or profiles
Specifications:
- Physical:
- Pixel dimensions: 36 x 30 x 13 mm (1.5 x 1.2 x 0.6 in.)
- Pixel dimensions with dome: 36 mm x 30 mm x 27 mm (1.5 x 1.2 x 1.1 in.)
- Weight: 1.8 kg (4.0 lbs.) for 64 Dots, 200 mm (7.9 in.) spacing, with 2 m (6.6 ft.) lead-in cable and connector
- Maximum number of pixels per string: 64
- Standard pixel spacing (pitch): 200 mm (7.9 in.)
- Minimum pixel spacing (pitch): 110 mm (4.3 in.)
- Maximum pixel spacing (pitch): 2000 mm (78.8 in.)
- Standard lead-in cable length: 2000 mm (78.8 in.)
- Maximum lead-in cable length: 5000 mm (196.9 in.)
- Control and Programming:
- Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
- Control options: Martin™ P3 System controller and/or DMX
- Control modes: Calibrated and raw
- Setting and addressing: P3 System Controller or RDM-compliant controller
- DMX channels: 3 per RGB Dot, string or group
- Color and intensity calibration: Dot-level
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Optics:
- Minimum LED lifetime: 50,000 hours (to >70% luminous output)
- LED manufacturer: Cree
- Binning: Tight color and flux binning
- Calibration: Full Gamut Pixel Calibration
- Photometric Data:
- Light source : Four RGB LEDs
- Viewing angle: 127° x 127°
- Viewing angle with dome: 180° x 180°
- Luminous intensity, RGB, calibrated mode: 6 cd
- Luminous intensity, RGB, raw mode: 7.5 cd
- Total output, RGB, calibrated mode: 18.8 lm
- Red output, RGB, calibrated mode: 5.2 lm
- Green output, RGB, calibrated mode: 12.3 lm
- Blue output, RGB, calibrated mode: 1.4 lm
- Construction:
- Dot: Clear polycarbonate, clear silicone filled
- Diffuser dome: White translucent polycarbonate
- Mounting clip: White polycarbonate
- Interconnecting cable: 6 x 20 AWG, black
- Minimum cable bend radius: 26 mm (1.1 in.)
- Protection rating: IP67
- RoHS compliant
- Installation:
- Orientation: Any
- Connections:
- Power & data input to VC-Dot string from VC-Feeder™: Custom 8-pin connector, IP67-rated
- Electrical:
- Power and data converter: Martin VC-Feeder™
- Peak power consumption (at full intensity, full white): 1.50 W per Dot
- Typical power consumption (with typical video content): 0.50 W per Dot
- Figures for typical video content are indicative only and will vary.
- Operating voltage: 15 VDC
- Thermal:
- Cooling: Convection
- Maximum ambient temperature (Ta max.): 55° C
- Minimum ambient temperature (Ta min.): -20° C
- Peak heat dissipation (calculated, at full intensity, full white): 6.5 BTU/hr.
- Typical heat dissipation (calculated, with typical video content): 2.5 BTU/hr.
