JBL CONTROL 25-1L 2-Way 5-Inch Surface-Mount Speaker Pair
JBL CONTROL 25-1L 2-Way 5-Inch Surface-Mount Speaker Pair
The Control® 25-1L is a two-way 5-¼” speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 25-1L an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.
Features:
- 5-1/4″ woofer with woven fiberglass cone
- 3/4″ PEI diaphragm tweeter with fluid cooling
- Contemporary, high-design appearance
- Built-in InvisiBall® mounting hardware, plus available U-bracket
- Weather resistant enclosure and transducers
- Wide 100° x 100° coverage
- 100 Watt power handling (200 Watt program)
- High fidelity sound character with broad frequency response of 60 Hz – 20 kHz
Specifications:
- Frequency Range (-10 dB): 60 Hz to 20 kHz
- Frequency Response (+/-3 dB): 85Hz – 17 kHz
- Power Rating: 200 W Continuous Program (2 hrs)
- Maximum Input Voltage: 25.3 V RMS (2 hrs), 50.6 V peak
- Maximum SPL3: 110 dB ave. Continuous Pink Noise (116 dB peak)
- Sensitivity4: 90 dB, 1W/1m (ave. 100 Hz – 10 kHz)
- Coverage Angle: 100° x 100°
- Directivity Factor (Q): 6.04 (averaged 1kHz – 16kHz)
- Directivity Index (DI): 7.6dB (averaged 1kHz – 16kHz)
- Nominal Impedance: 8 ohms
- Crossover Type: 2nd order low-pass, 3rd order high-pass
- Recommended Protective High-Pass: 60 Hz high-pass (24 dB/oct)
- Low Frequency Driver: High Frequency Driver 19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
- Enclosure Material: High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance Grille Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
- Installation: InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
- Environmental: IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
- Termination: Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
- Agency Rating: ROHS-compliant
- Colors: Black (RAL9004)
- Dimensions (H x W x D): 9.6 x 7.4 x 5.7 in; 8.0 in deep total when mounted on InvisiBall wall-mount bracket.
- Net Weight: 6.7 lbs
