JBL CONTROL 52-WH Satellite 2.5-Inch Speaker for Subwoofer-Satellite Speaker System – Pair – White
JBL CONTROL 52-WH Satellite 2.5-Inch Speaker for Subwoofer-Satellite Speaker System – Pair – White
The stylish Control 52 satellite loudspeaker produces superb high fidelity sound via a low distortion 60 mm (2.5 in) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex® former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allows each speaker to be angled up to 45° off-axis.
For full-range wide-bandwidth performance, either 2 or 4 Control 52P mid-high speakers can be driven from the Control 50S/T pendant subwoofer (or from a Control 60PS/T pendant or Control 40CS/T in-ceiling subwoofer). The crossover for this subwoofer-satellite system is included in the subwoofer, and the system can be driven either low-impedance or from a 70V/100V distributed speaker line.
Features:
- Stylish, unobtrusive design fits into a wide variety of decors
- Ability to intermix with Control 42C in-ceiling and Control 62P pendant satellite speakers
- 16 ohms impedance
- Wall-mount brackets included
- Available in white
- 2-Pack
Specifications:
- Frequency Range (-10 dB): 140 Hz – 20 kHz
- Frequency Response (±3 dB): 180 Hz – 17 kHz
- Power Capacity: 50 Watts Continuous Program Power (2 hrs); 25 Watts Continuous Pink Noise (2 hrs); 30 Watts Continuous Program Power (100 hrs); 15 Watts Continuous Pink Noise (100 hrs)
- Nominal Sensitivity: 85 dB (4.0V/1m = 1W); 82 dB (2.83V, 1m)
- Nominal Coverage Angle: 150° x 150° (omnidirectional)
- Rated Maximum SPL (1m): 94 dB average, 100 dB peak
- Nominal Impedance: 16 ohms
- Transducer Driver: 60 mm (2.5 in) with polypropylene cone, butyl rubber surround, 19 mm (0.75 in) copper-clad coil, vented Nomex® former, secondary bucking magnet,
and copper sleeved pole piece for high frequency extension. - Input Connector: Removable locking 2-pin connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)
- Material: High impact polystyrene, painted zinc-plated metal grille.
- Dimensions (H x W x D): Cabinet: 115 x 84 x 96 mm (4.5 x 3.3 x 3.75 in); Wall bracket: 51 mm (2.0 in)
- Net Weight: 0.7 kg (1.5 lbs)
- Shipping Weight: 0.8 kg (1.8 lbs)
- Included Accessories: Wall bracket (both speaker and wall parts), 2-pin locking connector.
