JBL LCT 81C/T Lay-in 2-Foot Square Ceiling Tile 8-Inch Speaker Pair – White
JBL LCT 81C/T Lay-in 2-Foot Square Ceiling Tile 8-Inch Speaker Pair – White
LCT 81C/T is a full-range ceiling speaker designed to lay into a 2 ft x 2 ft US-style suspended grid ceiling, with no cutting of ceiling tiles required, making for an easy and cost-effective installation with a minimum of mess. The low profile depth of only 100 mm (4 in) allows the speaker to fit in locations where deeper loudspeakers do not.
This loudspeaker is designed to provide excellent performance for paging and light-to-medium music in a wide variety of applications, including education classrooms, business music systems, retail stores, music/paging systems, airports, reception/waiting rooms, lounges, courtrooms, meeting rooms, and more.
The very high sensitivity of 96 dB provides maximum sound level, even at low tap settings. LCT 81C/T contains a 200 mm (8 in) dual-cone driver with a very high 96 dB sensitivity. The driver features a 25 mm (1 in) diameter voice coil with a Kapton coil-former and high-temperature wire for better power dissipation and long-term reliability. The speaker’s built-in 10 Watt transformer provides versatility by allowing use on 100V or 70V distributed loudspeaker lines, as well as at 8 ohms (low impedance) for driving directly from a low impedance power amplifier. Adjusting is convenient via a rotary switch on the side of the rear enclosure. Two safety seismic attachment tabs are provided for securing to ceiling deck, plus 4 holes are provided — one in each corner. The color of the perforated grille is white.
Features:
- High-efficiency 8″ (200mm) dual-cone driver
- Easy lay-in installation into 2ft x 2ft US-style suspended grid ceilings. No cutting of ceiling tiles is necessary
- Perforated metal grille included
- Combined 70 V/100 V and low impedance direct operation
- 20 Watts at 8 Ω (low-impedance) direct setting
- 10 Watt multi-tap at 70 V/100 V with taps at 10 W, 5 W , 2.5 W (and 1.3 W for 70 V only)
- Very low-profile at just 4.1″ (103mm) deep, to fit into ceilings that are shallow or that contain obstructions
- Easy bare-wire connection in protected compartment. Wire entrance from either top or side via knock-out
- Very high 96 dB sensitivity turns power from small amplifiers into maximum sound level for listeners
- Designed for high speech intelligibility
- 100° coverage pattern (conical)
- UL1480A and UL2043 certifications for use in ceiling plenum spaces
Specifications:
- Transducer: High-efficiency 8″ (200mm) dual-cone driver with 1″ (25mm) diameter voice coil, Kapton coil former, and high-temperature voice coil wire.
- Frequency Range (-10 dB): 100 Hz – 16 kHz
- Nominal Sensitivity: 96 dB
- Nominal Coverage Angle: 100° conical coverage (ave. 1 kHz – 4 kHz)
- Rated Maximum SPL: 108 dB @ 1m (3.3ft) average, 108 dB peak (at 8 Ω setting)
- Nominal Impedance: 8 Ω (in Direct/Thru 8 Ω setting)
- Transformer Taps: 10 W, 5 W, 2.5 W @ 70 V or 100 V (plus 1.3 W @ 70 V only)
- Recommended Protective High Pass: 90 Hz high-pass (24 dB/octave) for 8 Ω direct or any 70 V or 100 V tap setting
- Power Capacity:
- 40 Watts Continuous Program Power (at low-Z)
- 20 Watts Continuous Pink Noise
- Input Connector: Bare-wire inside protected in touch-proof wiring compartment.
- Tap Selector: Rotary switch accessible from side of backcan
- Materials: Steel rear enclosure, front baffle, and perforated grille
- Grille Color: White
- Dimensions: 23.9″ x 23.9″ x 4.1″ (607 x 607 x 103mm)
- Net Weight: 15.7 lbs. (7.1 kg)
- Shipping Weight: 18.3 lbs. ea/36.4 lbs. per pair-pack (8.3 kg ea/16.5 kg per pair-pack)
- Ceiling Cutout Size: No cutout required—speaker drops into ceiling grid
- Suspension / Safety-Seismic Attachment Points Two tabs on back baffle, plus 4 holes in corners
