Coda Line Array System with 32 AiRay/16 ViRay/32 Subs/22 Amps
Coda Line Array System with 32 AiRay/16 ViRay/32 Subs/22 Amps
System includes:
32 x AiRay Line Array Loudspeakers
12 x SC2F Line Array Subwoofers (Flown)
16 x ViRay Line Array Loudspeakers
12 x SCPF Line Array Subwoofers
8 x APS Loudspeakers
22 x Linus14D 4-channel Amplified Controllers
Rigging and Transportation Cases/Dolly for Above
Speak with a Sales Representative for more information.
Coda Audio AiRAY Full Range Line Array System
The AiRAY is a fully integrated compact 2x 12” / 3-way line array system, designed for wide varieties of applications where high output, even coverage and outstanding intelligibility is required. The AiRAY unique package brings together the high output of a large system with the flexibility of a compact system creating a new category in large reinforcement systems.
Specifications:
- Type: 3-way bi-amplified line array module
- Frequency response: 50 Hz – 22 kHz (-6 dB)
- Power handling AES / peak (passive): Bi-amplified only
- Low AES / peak: 2000 W / 8000 W
- Mid / High AES / peak: 300 W / 2600 W
- Sensitivity low 1W / 1m: 103 dB
- Sensitivity mid / high 1W / 1m: 114 dB
- Maximum peak SPL (with LINUS10)
- Low: 143 dB
- Mid / High: 148 dB
- Amplification, Cabinets per Amplifier:
- LINUS14D Optimum / Maximum: 4/6
- LINUS10 Optimum / Maximum: 2/3
- Dispersion horizontal: 90°, 120° or asymmetrical 105°
- Dispersion vertical: Array dependent: 0°, 0.5°, 1°, 2°, 2.5°, 3° to 8° in 1°-steps
- Components:
- Low frequency: 2x 12″ neodymium, water resistant cones, 4″ (101.6 mm) voice coil, 1000 W (AES) each
- Mid/High frequency:
- 2x 6″ DDP (Double Diaphragm Planar-wave-drivers)
- Mid: 3.5″ (90 mm) voice coil, 150 W (AES) each
- High: 1.75″ (44.4 mm) voice coil, 80 W (AES) each
- Crossover point: 400 Hz bi-amp, 6300 Hz passive
- Input connectors: 2x Neutrik™: 1x Input + 1x Link Cable
- Nominal impedance LF / MF+HF: 8 Ohm (1+/1-) / 16 Ohm (2+/2-)
- Enclosure material: Birch plywood
- Finish: Polyurea coating (water resistant)
- Flying hardware: Integrated
- Dimensions (WxHxD): 674 x 356 x 555 mm / 26.54 x 14.02 x 21.85″ (674 x 400 x 555 mm / 26.54 x 15.75 x 21.85″ incl. hardware)
- Net weight: 40 kg / 88.18 lbs
Coda Audio ViRAY Series 3-Way Line Array System
The ViRAY is a compact 3-way symmetrical line array module, designed for small to medium venues where high fidelity sound and outstanding intelligibility is required.
Features:
- Unique 8” coaxial mid/high planar wave driver
- Dual 8″ neodymium ultra low distortion cone drivers
- ViCOUPLER unites all transducersto perfom as a single source
- High power handling of 600 W
- Variable horizontal coverage of 120° or 80° or 100° asymmetrical (40°+60°)
- Vertical curving 0° to 10° variable in 1° steps
- Superior sound
- Integrated rigging system for flown or ground stacked arrays
- Multiplex enclosure with Polyurea coating for extreme durability and water protection
- Subwoofer extension with the SCV-F
- System integration with LINUS RACKs
Specifications:
- Type: Compact 3-way Bi-amplified line array module
- Application:Minimal 1, maximal 24 units line array
- Frequency response: 55 Hz – 22 kHz (-6 dB)
- Power handling AES / peak (passive): 600 W/ 2400 W
- Low AES / peak: 600 W/ 2400 W
- Mid AES / peak: 150 W/ 1300 W
- High AES / peak: 80 W/ 400 W
- Sensitivity low 1 W / 1 m: 99 dB
- Sensitivity mid/high 1 W/1 m: 112 dB
- Max. SPL peak low: 133 dB
- Max. SPL peak mid/high: 142 dB
- Amplification, Cabinets per Amplifier:
- LINUS14D Optimum / Maximum: 8/12 (bi-amp) or 16/24 (passive)
- LINUS10 Optimum / Maximum: 4/6 (bi-amp) or 8/12 (passive)
- Dispersion horizontal: 120°, 80° or 100° (60° + 40° or 40° + 60°)
- Dispersion vertical: Array dependent, 0°-10° in 1°-steps
- Components:
- Low frequency: 2x 8″ neodymium, water resistant cones 2″ (50.8 mm) voice coil, 300 W (AES) each
- Mid/High frequency:
- 8″ coaxial neodymium Planar-wave-driver
- Mid: 3.5″ (90 mm) voice coil, 150 W (AES)
- Hi: 1.75″ (44.4 mm) voice coil, 80 W (AES)
- Crossover point: 600 Hz passive or bi-amp (internal connector), 6300 Hz passive
- Input connectors: 2x Neutrik™: 1x Input + 1x Link Cable
- Nominal impedance LF / MF+ HF: 16 Ohm (1+/1-) / 16 Ohm (+2/-2)
- 3-way passive: 16 Ohm (2+/2-)
- Enclosure shape: Horizontal trapezoid 2x 5°
- Enclosure material: Birch plywood
- Finish: Polyurea coating (water resistant)
- Flying hardware: Integrated
- Dimensions (WxHxD): 674 x 242 x 385 mm / 26.54 x 9.53 x 15.16″
- Net weight: 25.5 kg / 56.22 lbs
- System Performance:
- Array(1xViRAY), Horizontal Coverage (120° or 80°), Vertical Coverage (12°), Peak Output (+6 dB) (133 dB)
- Array(2xViRAY), Horizontal Coverage (120° or 80°), Vertical Coverage (0 – 10° adjustable), Peak Output (+6 dB) (139 dB)
- Array(4xViRAY), Horizontal Coverage (120° or 80°), Vertical Coverage (0 – 40° adjustable), Peak Output (+6 dB) (145 dB)
- Array(8xViRAY), Horizontal Coverage (120° or 80°), Vertical Coverage (0 – 80° adjustable), Peak Output (+6 dB) (151 dB)
CODA AUDIO SCPF Line Array Subwoofer
The SCP-F is perfectly suited as a subwoofer for G700-Series and CUE-Series, extending the system performance down to 25 Hz. SCP-F is also an addition to AiRAY High Output line array systems. Typical applications are touring sound, theaters, houses of worship, dance clubs and live sound venues.
Features:
- 2 x 18” extreme high excursion neodymium woofers
- Extended frequency range: 25 Hz – 120 Hz (-6 dB)
- High power handling: 3000 W (AES)
- Sensor Control Technology
- Ultra low distortion
- Fast transient response. The upper and the ultra low frequency are time aligned
- Rigging hardware for flown or ground-stacked arrays
- Cardio or omnidirectional configurations
- System integration with LINUS Loudspeaker Management Amplifiers
Specifications:
- Type: High Output Dual 18″ Subwoofer with SC Technology
- Application: High output subwoofer
- Frequency response: 25 Hz – 120 Hz (-6 dB)
- Power handling AES / peak: 3000 W / 12000 W
- Sensitivity 1 W / 1 m: 103 dB
- Maximum output peak: 144 dB
- LINUS14 Optimum / Maximum: 4/4
- Components: 2 x 18″ neodymium ultra low distortion woofers 4″ (101.6 mm) voice coil, 1500 W (AES) each
- Nominal impedance: 4 Ω (1+/1-)
- Input connectors:
- 2 x Neutrik™ NL4MP (rear)
- +1 x Neutrik™ NL4MP (front)
- Velocity sensors output:
- 1 x Neutrik™ NC3MAV (rear)
- 1 x Neutrik™ NC3MAV (front)
- Suspension: Flying hardware integrated
- Enclosure material: Birch plywood
- Finish: Black polyurea coating
- IP rating (IEC 60529) IP54
- Weather protection options:
- Standard IP55: IP55 (Amphenol connectors)
- MG1 (Marine Grade 1): IP55
- Dimensions: (WxHxD) 1108 x 550 x 800 mm / 43.85 x 21.65 x 31.5″
- Net weight: 95 kg / 209.44 lbs
Coda Audio APS 3-way Arrayable Point Source
The APS is a compact 2x 10” / 3-way arrayable point source that combines the user-friendliness of a point source with the perfect arrayability of a line array creating a unique category reinforcement system for medium size venues.
Features:
- 3-way Arrayable Point Source
- Unique 9” Dual Diaphragm Curved-wave-driver (DDC)
- Dual 10″ neodymium ultra low distortion cone drivers
- APS-COUPLER sums the energy from all transducers to perform as a single source
- Integrated rigging system for horizontal or vertical arrays as well as Single use
- Variable horizontal coverage: 120°, 90°, 60° or asymmetrical: 105° (45°+60°); 90° (30°+60°); 75° (30°+45°)
- Variable vertical coverage of 20° (one cabinet), 40° (two cabinets), 60° (3 cabinets) etc. up to 360° (18 Cabinets)
- Linear phase response for superior fidelity
- Frequency range: 50 Hz – 22 kHz
- Exceptionally high sound pressure
- Multiplex enclosure with Polyurea coating for extreme durability and water protection
- Subwoofer extension down to 28 Hz with APS-SUB
- System integration with LINUS amplifiers
Specifications:
- Type:3-way Arrayable Point Source
- Frequency response:50 Hz – 22 kHz (-6 dB)
- Power handling:
- Low AES peak: 1200 W / 4800 W
- Mid / High AES / peak: 150 W / 1300 W
- Sensitivity:
- Low 1 W / 1 m: 100 dB
- Mid / High 1 W / 1 m: 111 dB
- Maximum peak SPL (with LINUS14)
- Low: 137 dB
- Mid / High: 146 dB
- Amplification, Cabinets per Amplifier:
- LINUS10-C Optimum / Maximum: 8/12
- LINUS14D Optimum / Maximum: 8/12
- LINUS10 Optimum / Maximum: 4/8
- Dispersion horizontal: 120°, 90°, 60° or 105° (45°+60°); 90° (30°+60°); 75° (30°+45°)
- Dispersion vertical: 20°
- Components:
- Low frequency: 2x 10″ neodymium, water resistant cones 3″ (77 mm) voice coil, 600 W (AES) each
- Mid / High frequency: 9″ coaxial neodymium 20° Curved-wave-driver
- Mid: 3.5″ (90 mm) voice coil, 150 W (AES)
- High: 1.75″ (44.4 mm) voice coil, 80 W (AES)
- Crossover point: 500 Hz, 6300 Hz passive
- Input connectors: 2x Neutrik™ NL4MP
- Nominal impedance: 8 Ω (+2/-2)
- Enclosure material: Birch plywood
- Finish: Polyurea coating (water resistant)
- Flying hardware: Integrated
- Dimensions (WxHxD): 674 x 291 x 492 mm / 26.54 x 11.46 x 19.37″
- Net weight: 27 kg / 59.52 lbs
Coda Audio LINUS14D 4X Channel Audio Amplifier 3500-Watt
The LINUS14D is a four channel DSP, network, comparator and amplifier delivering 4x 3500 W of clean power in a light weight 19”/2U package. The 4 audio inputs are selectable from analog, LiNET digital audio or DANTE audio network and are routable to any of the 4 outputs via the input matrix.
Features:
- Very high output power (4x 3500W @ 4 Ohm)
- SHARC floating point DSP @ 96 kHz
- DANTE and LiNET – 8x freely configurable digital audio signals over CAT5 cables
- 4 dynamic comparators for use with CODA Audio sensor controlled subwoofers
- LINUS Control Ethernet interface provides network control and monitoring of amplifiers
- Advanced IIR and linear-phase FIR filters
- Efficient Class D-IC design for superior sound performance
- Switch-mode power supply for 115 V / 230 V with automatic voltage selection
Specifications:
- Number of output channels: 4
- Output: stage Class D
- Internal samplerate / bit-depth: 96 kHz / 24 bit
- Signal-to-noise ratio (22 Hz – 20 kHz, 4 Ω – analogue input):
- >108 dB (unweighted)
- >111 dB (A-weighted)
- Signal-to-noise ratio (22 Hz – 20 kHz, 4 Ω – digital input):
- > 116 dB (unweighted)
- > 119 dB (A-weighted)
- Frequency response (8 Ω load, with CLEAR preset): 20 Hz–20 kHz = (+0.0 dB / -1.0 dB)
- THD+N & IMD (4 Ω load @ 1/2 output power): 20 Hz–20 kHz = < 0.005%
- Latency (input to loudspeaker output):
- min. 2.70 ms AES/EBU input
- min. 2.00 ms Analogue input
- Protection circuits: Inrush current limiter, Thermal limiter, Output DC, SMPS over-current, Output overload
- LED indicators: Mute status, Limit, Signal, Protection, Ethernet control active, Digital signal locked, DanteTM Power on
- Ethernet connection:
- 2x 100 Mbps RJ45 Control
- 1x 100 Mbps RJ45 DanteTM
- Dimensions (W x H x D): 483.5x88x454mm / 19×3.4×17.8”
- Shipping dimensions (W x H x D): 675x130x560 mm / 26.5×5.1×22”
- Net weight: 14.75 kg / 32.5 lbs.
- Shipping weight: 17.5 kg / 38.6 lbs.
