Shure MX415/S 15 Inch Gooseneck Microphone with Mount – Preamp – Supercardioid – 5-Pin Connector
Shure MX415/S 15 Inch Gooseneck Microphone with Mount – Preamp – Supercardioid – 5-Pin Connector
The MX415 surface mount version is a gooseneck microphone with a Bi-Color LED or light ring status display. It has a 38.1 cm gooseneck and is suitable for boardrooms and other sites where aesthetics are important.
Features:
- Gooseneck length: 15 inch / 38.1 cm
- Low profile, aesthetic design
- Wide dynamic range and smooth frequency response
- RF filtering with CommShield™ technology
- Status indicator: Bi-Color LED at gooseneck bottom or red light ring on gooseneck top
- Capsule option: Supercardioid
Specifications:
- Type: Condenser (electret bias)
- Frequency Response: 50.17000 Hz
- Polar Pattern (at 1 kHz): Supercardioid
- Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
- Output Configuration: Active Balanced
- Sensitivity (at 1 kHz , open circuit voltage): .34 dBV/Pa (21 mV)
- Maximum SPL (1 kHz at 1% THD, 1 kW load): 120 dB
- Equivalent Output Noise (A-weighted): 27 dB SPL
- Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 68 dB
- Dynamic Range (1 k Ohms load at 1 kHz): 93 dB
- Common Mode Rejection (10 Hz to 100 kHz): 45 dB minimum
- Preamplifier Output Clipping Level (1% THD): -8 dBV (0.4 V)
- Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector.
- Weight: 0.07 kg (0.154 lbs)
- Logic Connections: LED IN: Active low (.1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V.
- LOGIC OUT: Active low (.1.0V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 50V (up to 50V through 3kŸ).
- Mute Switch Attenuation: -50 dB minimum
- Cable: MX400DP: 6.1 m (20 ft) attached cable with shielded audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic control
- Environmental Conditions:
- Operating Temperature: -18.57 °C (0.135 °F)
- Storage Temperature: -29.74 °C (-20.165 °F)
- Relative Humidity: 0.95%
- Power Requirements: 48.52 Vdc phantom, 8.0 mA
