Clear-Com Intercom System Combo Wired Plus Wireless Bundle with 10 Headsets
Clear-Com Combo Wired Plus Wireless Bundle
Bundle Includes:
- 1x Clear-Com BS410 Base Station for DX410 System
- 1x Clear-Com MS-702 Main Intercom Station
- 4x Clear-Com BP410 Belt Pack for DX410 Base Station
- 4x Clear-Com CC-15 Single Ear Noise-Canceling Headset
- 6x Clear-Com CC-300 Single-Ear Standard Headset
- 6x Clear-Com RS-701 Encore Partyline Belt Pack
- 1x Clear-Com AC50 4-Port Battery Charger for BAT50
Clear-Com BS410 Base Station for DX410 SystemThe BS410 is the base station for the DX410 wireless system, supporting up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets. The system operates in the 2.4GHz frequency band and features high quality 7kHz wideband audio. The BS410 allows the option for audio bridging by combining 2-wire and 4-wire audio together on A or B channels.
Clear-Com MS-702 Main Intercom StationCompact, feature-laden, single rack-space intercom main station supports up to 40 RS-701 beltpacks, 10 speaker stations or 12 headset stations on two channels.
Clear-Com BP410 Belt Pack for DX410 Base StationThe BP410 is a rugged, light-weight, ergonomically designed beltback to be used with the BS410 base station. Single-channel operation allows any four beltpack and/or all-in-one wireless headset uses to engage in simultaneous, full-duplex communication. In dual-channel operation, three users may be in full-duplex with up to 13 additional users in listen-only mode. The BP410 has a rugged, over-mold, reinforced casing and long-lasting keypads with no mechanical switch. Using the BAT50 Li-Ion battery, the BP410 has up to 12 hours of battery life.
Clear-Com CC-15 Single Ear Noise-Canceling HeadsetCC-15 is a single-ear headset with noise-cancelling microphone for DX Series wireless intercom.
Clear-Com CC-300 Single-Ear Standard HeadsetThe CC-300 single-ear headset features high ambient-noise attenuation headphones and a hyper-cardioid dynamic microphone that provide high quality audio. The headset has a flexible design and a soft-ear pad to offer superior comfort. Able to rotate 300 degrees, the microphone boom acts as an on/off switch for quick microphone muting.
Clear-Com RS-701 Encore Partyline Belt PackThe RS-701 is a single-channel analog belt pack with an XLR-3 line connector and XLR-4M headset connector. A microphone preamp with a dynamic range of 130dB enables intelligible voice communication for every volume level, from a whisper to a shout. The belt pack also combines high headroom, low-noise audio and shaped frequency contour (Clear-Com Sound) to deliver crystal-clear audio. The RS-701 is compatible with all Encore partyline products, as well as the PL-Pro line and other partyline systems via Encore interfaces.
Clear-Com AC50 4-Port Battery Charger for BAT50The AC50 is a battery charger for the BAT50 batteries. The AC50 can charge up to four BAT50s simultaneous with additional reserve slots for four extra batteries. Charge time is 2.5 hours.
Clear-Com BS410 Features:
- Two-channels
- 7kHz wideband audio
- 2-wire and 4-wire bridging
- 2-wire auto-nulling
- Lost packet concealment
- Upgraded radio
- Supports up to 15 beltpacks and/or wireless headsets
Clear-Com MS-702 Features:
- Channel A-B linking
- Program input with individual channel level controls
- Remote mic kill switch
- External relay circuit
- Stage announce
- Dimensions: 19″ x 1.75″ x 6.5″ (WxHxD)
Clear-Com BP410 Features:
- Two-channel
- 7kHz wideband audio
- Up to 15 beltpacks and/or all-in-one handsets on a single system
- Single or dual-channel operation
- Up to 12 hours of battery life
- Channels: 2 audio channels
- Frequency Range: 2400 MHz – 2483.5 MHz
- Frequency Response: 200 Hz – 7 kHz
- Antenna: Internal, horizontal/vertical diversity
- Headset Connector: 4-pin, mini-DIN
- Microphone: Electret
- Headset Output: 160mW into 32 Ohms
- Communication Security: 64-bit encryption
- System Distortion: <2%
- Controls: Power, Volume-Up, Volume-Down, A, B, ISO
- Indicators: Dual-color LED (red/green)
- Battery Requirements: 3.6V lithium-ion
- Battery Life: Up to 12 hours
- Antenna: Internal, Horizontal/Vertical diversity
- Transmitter
- Type: Frequency Hopping, Spread Spectrum (FHSS)
- Transmit Power: 100mW burst
- Modes: Momentary or Latch
- Type: Gaussian filtered FSK, TDMA
- Frequency Stability: 13 ppm
- Harmonics/Spurious: Exceeds FCC and ETSI specifications
- Receiver
- Type: Frequency Hopping, Spread Spectrum (FHSS)
- RF Sensitivity:
- Frequency Stability: 13 ppm
- Distortion: <2%
- Environmental: 32°F to +122°F (0°C to +50°C)
- Dimensions: 2.25 x 4.5 x 1 in (57.2 x 114.3 x 25.4 mm) (HxWxD)
- Weight: 7.4 oz (0.21 kg) including battery and pouch
Clear-Com CC-15 Features:
- Single Ear Headset
- Enclosed Ear Phone
- Leatherette
- Type of Microphone: Electret
- Microphone Unit:
- Impedance: 2.2k Ohm +30%
- Sensitivity: -51dB, +3dB (0dB – 1V/Pa, 1kHz)
- Speaker Unit:
- Impedance: 40 Ohms +15% (1kHz)
- Max Power: 100mW (2.0V RMS)
- Frequency Range: 20Hz – 20kHz (-15dB/1kHz)
- Output SPL: 106dB = +2.0dB
- Input: 1mW (0.2V RMS)
- Weight: 6oz (170g) without cable, 8.1oz (230g) with cable
Clear-Com CC-300 Features:
- Type: closed-back
- Driver: 40mm diameter, neodymium magnet, copper-clad aluminium wire voice coil
- Headphone frequency response: 40Hz – 20kHz
- Microhpone element: dynamic
- Microphone polar pattern: hyper-cardioid
- Microphone frequency response: 300Hz – 20kHz
- Open circuit sensitivity: -61.0 dB ±3.5 dB; at 1kHz, typical, 102 dB ±3 dB; at 1kHz typical
- Impedance: 400 ohms ±30%; at 1kHz typical
- Microphone: 200 ohms ±30%; at 1kHz typical
- Connector cable: 5ft (1.55m) long with 8-pin connector at headset end; 4-pin Female XLR
- Includes drawstring carry bag
Clear-Com RS-701 Features:
- Microphone pre-amplifier
- Microphone to Line (without limiter acting) frequency response: 280 – 15k Hz ± 3dB
- Microphone output to line – audio level (-50dBm Electret input): -9dBm
- Microphone output to line – distortion: <0.1%
- Microphone output to line – signal to noise: >65dB
- Clear-com sound: yes
- Headphone amplifier
- Frequency response – line to headphone: 150 – 20k Hz ± 3dB
- Headphone input from line – audio level (-9dBm Electret input): 3.5dBm
- Headphone input from line – distortion: <0.5%
- Headphone input from line – signal to noise: >50dB
- Earphone to mic – crosstalk: >80dB
- Sidetone – adjustment range (-80db mic input): >45dB
- Keypad indicators: power: green LED; talk: green LED; call: orange LED
- Connectors: intercom line: (2) 3-pin XLR–M–F: channel 1 2-Wire intercom channel pin 1: common; Pin 2: PL power (+28VDC); pin 3: line (Audio)
- Headset: 4-pin XLR–M: headset connector pin 1: mic – (Mic Common); pin 2: mic +; pin 3: spkr-; pin 4: spkr+
