Bose L1 Model II with B1 Bass System & T8S ToneMatch Mixer
Bose L1 Model II with B1 Bass System & T8S ToneMatch Mixer
Bundle Includes:
- 1x Bose L1 Model II Speaker System w/ Single B1 Bass Module
- 1x Bose T8S ToneMatch 8-Channel Mixer for L1 or F1
Bose L1 Model II Speaker System w/ Single B1 Bass ModuleBose L1 Model II systems are our best performing, most portable amplification systems for musicians, singers, DJs and public speakers. These loudspeakers deliver wide horizontal sound coverage and our smoothest tonal balance—across the stage and throughout the room. Lightweight and modular, this sleek system fits easily into a car trunk and takes just a few minutes to set up.
Like the original, award-winning Bose L1 system, the Model II sound system is an all-in-one innovation that replaces conventional monitors, mixers and PA speakers. And this professional sound system is packed with proprietary Bose technologies designed to improve your amplified sound. Sound advantages—only from Bose.
The system’s breakthrough loudspeaker produces wide, uniform sound coverage of nearly 180 degrees—onstage and throughout an audience of up to several hundred—with little dropoff in volume and tone.
The Model II system also features Articulated Array speaker technology for better tonal balance. The loudspeaker’s 24 vertically mounted drivers are precisely angled to create clearer highs and more consistent tone in the room. Even people off to the sides of these stage speakers enjoy well-balanced, detailed sound. Deep bass from small enclosures.
Bose L1 Model II systems come with one B1 bass module to ensure more accurate amplification of lower notes for most voices and instruments—including guitars, keyboards and various horns. The double bass package is recommended for use as a bass guitar amplifier, and for kick drums and DJs.
B1 bass modules are considerably lighter and smaller than conventional bass bins required for the same performance. Power up to two bass modules on a single power stand. Add two more bass modules to the system with an optional PackLite® extended bass package.
The L1 Model II power stand weighs only 24 pounds, and its four retractable legs make it very easy to transport and set up. The power stand also has a simplified control section; the single line-level input can be used with instruments, mics, mixers, laptops, MP3 players or DVD systems.
All of the system’s components are also built to handle the road. The loudspeaker has a rugged, reinforced grille, and each package includes padded carrying bags for major components. For multichannel power: ToneMatch® audio engine.
Bose B1 Bass Module For L1 SystemsThis compact, powerful bass enclosure delivers the depth and impact of such instruments as bass guitars, drums, and low voices. Low-pitched wind or string instruments, guitars and keyboards can also benefit from the additional low-end output the B1 provides. Includes cable to connect module to power stand and slip cover.
Bose T8S ToneMatch 8-Channel Mixer for L1 or F1Take control of your music with the T8S ToneMatch® mixer, a compact interface designed for performers. It features advanced digital audio processing that never runs out, with independent EQ, dynamics and effects per channel. Get your sound fast with Bose® ToneMatch® processing for natural-sounding vocals and instruments and Bose zEQ for effective adjustments on the fly.
The T8S uses illuminated, tactile knobs and indicators for spontaneous control, even on dimly-lit stages. This 8-channel mixer is one of the most compact, highest-density mixers available with XLR-combo jacks, Aux sends, Aux inputs, USB-A and -B for USB drive playback or PC/Mac interfacing, a dedicated headphone jack and analog outputs. Additional features like tap tempo delay, built-in chromatic tuner, master out EQ and recallable scenes make it easy to be ready for the show. Rugged and ready to go, the T8S is the ultimate on-stage companion for performing artists.
Bose L1 Model II Speaker System Features:
- Recommended for most instruments, vocalists and public speakers
- Spatial Dispersion™ and Articulated Array® speaker technologies
- Single-input power stand with retractable legs
- One B1 bass module included
- Integrated power amplifiers in the power stand provide clean, precise amplification for L1 Model II system
- ToneMatch® port on power stand for digital audio and power connection to ToneMatch audio engine
- Analog input, trim control and signal/clip LED
- L1 system automatically adjusts equalization appropriately when bass modules are connected
- Bass line out delivers post-DSP bass signal output. Accepts 1/4″ TRS phone cable
- Retractable legs provide stability for streamlined L1 Model II power stand and loudspeaker
Bose B1 Bass Module Features:
- Compatible products: L1® Model I system, L1® Model II system
- Delivers the depth and impact of such instruments as bass guitars, drums, and low voices
- Includes cable to connect module to power stand and slip cover
Bose T8S ToneMatch Features:
- Powerful audio processing
- Updated, studio-quality effects with advanced digital audio processing
- High-quality effects include compressor, limiter, de-esser, noise gate, chorus, flanger, phaser, tremolo, delay and reverb
- Bose® ToneMatch® processing for natural-sounding vocals and instrument
- zEQ focuses the sound of ToneMatch presets for effective adjustments on the fly
- Independent ToneMatch, EQ, dynamics and effects per channel
- Dedicated reverb on Aux 1 send, and a global shared reverb for use across all channels
- Master output EQ helps compensate for venue acoustics
- Full end-to-end tonal optimization when used with Bose L1® and F1 systems
- Seamless live control
- Tactile controls and indicators designed for live, on-stage use
- Fast-learning user interface
- Built-in tap tempo delay, chromatic tuner, and recallable scenes
- LED display and illuminated controls are easy to read and use, even on dimly-lit stages
- High-density connectivity
- Unprecedented connectivity and control in a small digital stereo mixer
- Eight high-quality audio preamps with XLR-combo jacks for microphones or instruments, and switchable phantom power
- Two ToneMatch outputs for digital audio and power
- Two Aux sends, and Two Aux inputs for additional sources
- USB-A and -B for USB drive playback or PC/Mac interfacing
- Independent headphone and balanced 1/4″ TRS stereo outputs
- Convenient Gig-Ready Features
- Rugged enclosure with a protective magnetic cover to protect controls and connectors
- Includes a ToneMatch cable for connecting to a Bose L1 Model II or L1 Model 1S system for digital audio and power
- Bottom insert allows you to use standard mounting accessories to keep your T8S within reach
Bose T8S ToneMatch Specifications:
- 8x Combo XLR-1/4″ inputs
- 2x Aux inputs
- 2x Aux sends
- 1/4″ TRS stereo outputs
- Dedicated headphone output
- USB A and B for playback or PC
- Front-panel output meters
- Protective magnetic cover
- Universal power supply
- Dimensions: 8.4″ x 12.25″ x 3.25″ / 214 x 311 x 83 mm (D x W x H)
- Weight: 1.9 kg / 4.1 lbs.
