QSC KLA12 Line Array (x4) & KLA181 Subwoofer with Flybar
QSC KLA12 Line Array x4 with KLA181 Sub and Flybar
Bundle Includes:
- 4x QSC KLA12-BK 12″ 500W 2-Way Powered Line-Array B
- 1x QSC KLA181-BK 1000W 18″ Powered Subwoofer Black
- 1x QSC KLA-AF12-BK Aluminum Array Frame For KLA Black
QSC KLA12-BK 12″ 500W 2-Way Powered Line-Array Speaker (Black)The KLA Series brings the power and sophistication of a line array system into an easy-to-use product significantly redefining the line array product category. With its simple Lift, Click and Play approach, KLA can be deployed in a fraction of the time required by comparable line array products. This fixed arcuate, active line array system is ideal for a wide range of portable and permanently installed applications ranging from live entertainment to houses of worship or other venues where a line array system is desired. In an installed application, multiple KLA Series loudspeakers can be “daisy-chained” for total gain control from a single remote pot wired to the on-board Phoenix-style connector. Additional power module characteristics on KLA include a balanced, line-level XLR input in parallel with an XLR “Thru” connector, PowerCon In and Thru connectors, Attenuation Control and LED indicators for Signal, Limit, Power and Standby status.
In addition to DEEP™ DSP algorithm, GuardRail™, Auto Standby, balanced line-level XLR input with an XLR “Thru” connector, Attenuation Control and LED indicators, the KLA181 subwoofer also includes a polarity switch to optimize summation between subwoofer and top-boxes.
QSC KLA-AF12-BK Aluminum Array Frame For KLA Series (Black)
This KLA AF12 array frame can be flown with an array of up to 480 lbs., allowing for a maximum array of five KLA12 loudspeakers and two KLA8 subwoofers.
QSC KLA12-BK Features:
- 500 W x 500 W power module
- Rugged, ABS enclosure delivers lightweight durability
- SOLO Rigging System supports deployment without tools or external hardware
- Ar-Q Frequency Optimization quickly tunes the array with the click of a dial, adjusting for the appropriate number of boxes
- 10:1 design factor supports arrays of up to 480 lbs. (218 kg) 5 x KLA12 and 2 x KLA181
- 90° x 18° nominal coverage (requires only five boxes to configure a 90° x 90° array)
- High power, 12″ low frequency driver provides extension down to 44Hz without subwoofers
- Extensive DSP further enhances and protects performance
- 1.75″ diaphragm compression driver delivers clear and powerful high-frequency reproduction
- powerCON Input and Thru connections
- Tilt-Direct pole mount assists directivity in single-unit applications
- Configuration: Multipurpose 2-way
- Transducers – High & Low: 1.75″ diaphragm compression driver & 12″ cone transducer
- Frequency Response (-6 dB): 49 Hz – 18 kHz
- Frequency Range (-10 dB): 44 Hz – 20 kHz
- Nominal Coverage: 90° H x 18° V
- Maximum SPL (1 meter): 131 dB peak
- Power Output HF: 500 W Class D continuous & LF: 500 W Class D continuous
- Input Impedance (ohms) XLR: 40k balanced / 20k unbalanced
- Controls: Power, Attenuation, LF Setting (External Sub/Normal/DEEP), Array Size (1-5), Front LED (Pwr/Limit/Off)
- Indicators: Power, Signal, Standby, Limit
- Connectors: Balanced female XLR line level input, Balanced male XLR full range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON® power connector AC Out
- Cooling: On demand, 50 mm variable speed fan
- Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail
- Transducer Protection: Thermal limiting, excursion limiting
- AC Power Input: Universal power supply 100 – 240 VAC, 50 – 60 Hz
- Material: Impact resistant ABS
- Finish: Black or White paint
- Grille: Black or White powder coated 18 gauge steel
- Dimensions (HWD): 15.0″ x 23.4″ x 16.6″(382mm x 594mm x 422mm)
- Weight (Net):55 lbs (25 kg)
- Available Accessories KLA12 TOTE, K Series M10 Kit, KLA AF12 Array Frame
QSC KLA181-BK Features:
