Rodec Scratch-Box High Quality 2-Ch 10 Mixer
Features:
- 10 inch width – 9 units – mixing panel.
- Frontpanel in elegant Titanium paint.
- Aluminium anodised smooth scratchplate, no obstructions by any paint of text print on the panel.
- Fronthandles to carry the mixer and to avoid unwanted moving of the buttons.
- Same height as Technics SL1210-MKII turntable.
- 4 Input channels: 2 Phono inputs on gold plated RCA connectors, 4 Line inputs CH1 + CH2 + CH3/FX-return + CH4/Session/Backtape-in, 1 Microphone input on COMBO (XLR-JACK) connector.
- Outputs: 2 Master outputs on RCA connectors, Symmetrical output with XLR-connectors on master 1, 1 Aux/FX-send output, 1 Record/aux/session output on RCA connectors, 1 Strong head-phones output on JACK (6,35mm) and mini-JACK (3,2mm).
- Control functions channel 1 and 2:
- Channel 1-2 reverse switch.
- Phono-Line input select switch.
- Rotative level control per channel.
- Triple tone control with short faders, for very fast manipulating of the audio spectrum (+10dB/ -21dB), with 90degrees turnable buttons.
- Aux/FX-send push-button for routing the signal to external effects-units.
- Short balance fader.
- CUT-switch with very low operating force. Can be used in 3 modes, momentary-CUT, latching-CUT and double-speed-CUT. Can be placed in 8 positions.
- Easy slide 45mm fader specially designed for high speed operating.
- Channel fader reverse switch with LED indication at the front.
- Channel fader curve control with potentiometer at the front.
- Easy slide 45mm crossfader to fade between channel 1 and 2.
- Crossfader reverse switch with LED indication at the front.
- Crossfader curve control with potentiometer at the front.
- PFL ON/OFF button.
- PFL select fader, to create a mixed signal of channel 1 and 2 in the headphones.
- All volume controls on channel 1 and 2 are done by microcontroller controlled VCA. The microcontroller works with fuzzy-logic-software, with a clock frequency of 20MHz. This fuzzy-logic-software modifies itself depending on the position of the different controls and depending on the method of operating of the user of the mixing panel.
- The channel faders, crossfader and CUT-switches can easily be replaced via frontpanel after lifting of the scratchplate.
- Control functions channel 3:
- Mic-Line input select switch.
- Rotative level control.
- 0dB LED to adjust the level.
- Dual band equalizer with rotative potmeters.
- PFL ON/OFF button.
- Routing switch to route the signal to channel 1 or 2 or directly to the mix.
- Short channel fader for fast operation.
- Channel 4: – Rotative level control.
- Soft touch rotative knobs for better grip on all rotative potmeters.
- Mode switch to select mono or stereo operation of the mixing panel, ideal for working with records with different left and right tracks.
- Two master outputs with rotative volume control (also useable as monitor or booth output).
- Two bright VU-meters to show the levels of the inputs or the mixed signal.
- Normal and upside down text print at the back panel to facilitate connection.
- Soft rubber anti-slide buttons at the bottom of the mixer.
- Power switch on the back of the panel, to avoid accidentally switching off the panel.
- External power supply, to reduce disturbances.
