Martin VDO Fenix 6 mm LED Video Panel
Martin VDO Fenix 6 mm LED Video Panel
The VDO Fenix 6 is the first in the family of touring-friendly outdoor LED video panels with 6 mm pixel pitch and full cross-rental compatibility. The robust and ergonomic frame eliminates the need to use an add-on touring frame and allows for fast and easy build-up of LED video walls. VDO Fenix 6 is driven by the award-winning Martin P3 System Controller family that also controls Martin’s creative LED video products, ensuring bright and optimal image quality in a variety of outdoor (and indoor) rental applications. All panels leaving our factory in Denmark are calibrated to match existing panels, making them highly cross-rentable.
Features:
- Robust and touring-friendly – ready to tour straight from the box
- 6 mm pixel pitch
- 576 x 576mm panel
- Robust casted frame with “touring-ready” mechanics
- Approx. 36 kg per SQM
- Bright for outdoor use
- 48 bit per pixel processing
- PowerCON True-1 Power In and True connector (200-240V)
- Easy to assemble and configure – requires just one person
- Fully calibrated for optimal image quality and full cross-rental compatibility
Specifications:
Control/User Interface
- Device status: Multicolor status LED
- Device test and reset: Pushbutton to call up local test patterns and reset device
Photometric Data
- Pitch (pixel center-to-center): 6.857 mm
- Total output (max.): 5500 Nit (calibrated
- Color resolution: 16 bits per color (48 bit per pixel)
- Resolution, one panel: 84 x 84 pixels
- Pixels per panel: 7056
- Color and intensity calibration: Pixel-level
Video Processing
- Video signal processor: Martin P3-100, P3-200, P3-300 or P3-PC System Controller
- System processing depth: 16 bits per color (48 bit per pixel)
- Refresh rate: 10 500 Hz
- Calibration: Per-pixel color and brightness, stored inside each LED block for easy service
- System latency: Progressive 1 frame, Interlaced 3 frames
- Latency between first and last panel: None
- Frame synchronization to analog signal or genlock: Yes, integrated in P3 System Controller
- Image rotation: Yes, integrated in P3 System Controller
- Scaling: Yes, integrated in P3 System Controller
- De-interlacing: Yes, integrated in P3 System Controller
- Gamma curve selection and adjustment: Yes, integrated in P3 System Controller
- Real-time panel content remapping: Yes, integrated in P3 System Controller
- Color temperature control: Yes, integrated in P3 System Controller
- Color space control: Yes, integrated in P3 System Controller
P3 Signal Protocol
- Signal type: Gigabit Ethernet
- Protocol: Proprietary Martin P3
- Hot pluggable: Yes, electrically isolated at all connections
- Cable type: Ethernet, CAT 5e or better
- Cable length: Up to 100 m between any 2 devices, extendable with Ethernet switch
Construction
- Panel frames: Aluminum
- LED modules per panel: 14
- Color: Matt black
- Protection rating: IP65
Installation
- Orientation: Any
- Rigging: Individual panel via standard truss clamps, full column(s) via header hardware
- Max. suspended in one column: 21 VDO Fenix family panels
- Panel interlocking: Quick-release mounting system, single-person operation
Connections
- Power input: Neutrik PowerCON TRUE 1
- Data input: IP65-rated Gigabit Ethernet connector
- Power thru: Neutrik PowerCON TRUE 1
- Data thru: IP65-rated Gigabit Ethernet connector
Electrical
- AC power: 200-240 V nominal, 50/60 Hz
- Power supply unit: Integrated, auto-sensing multi-voltage
- Peak power consumption (at full intensity, full white): 250 W
- Typical power consumption (with typical video content): 85 W
- Figures for typical video content are indicative only and will vary
Thermal
- Cooling: Convection
- Maximum ambient temperature (at full intensity, full white): 40° C (104° F)
- Minimum ambient temperature (Ta min.): 0° C (32° F)
Physical
- Height: 576 mm (22.7 in.)
- Depth: 100 mm (4 in.)
- Weight: 12.4 kg (27.4 lb.)
- Width: 576 mm (22.7 in.)
