Dynaudio DBM50 Powered Reference Speaker
Dynaudio DBM50 Powered Reference Speaker
From the handcrafted Dynaudio drivers to its beautiful exterior, DBM50 is specifically engineered to perfectly reproduce your desktop mix and truly represents a revolutionary new angle in desktop mixing.
Specifications:
- System: Two-way Active Nearfield Monitor
- Frequency Response (+/- 3 dB): 46 Hz – 21kHz
- Max SPL 1m, pair (IEC Short Term): 117 dB peak
- Max SPL 2m, 5.1 (IEC Short Term): N/A
- Input level for 85 dB SPL @1m (+4/-10): 80mV @ 0dB setting
- Input level for max peak SPL (+4/-10): -10dB: 4.8Vrms, 0dB: 1.5Vrms, +4dB: 1Vrms
- Power consumption: Idle: 5.8 W / Max: 94 W
- Amplifier power: Tweeter: 50 W / Woofer: 50 W
- Resonance Frequency: 39 Hz
- Internal Cabinet Volume: 13.9 liters
- Bass Principle: Bass Reflex
- Crossover Frequencies: 1500 Hz
- Crossover Slope: 6 dB/oct
- Tweeter: D-281 – 28 mm soft dome, rear chamber, magnetic fluid, 4mm aluminium front, Pure alu wire voice coil
- Woofer: 180 mm/7.1″, One-piece thermo formed MSP cone, 75mm/3″ pure aluminum wire on kapton former
- Weight: 7.2 kg / 15,9 lbs
- Dimensions (W x H x D): 230 x 348 x 335 mm / 9.1″ x 13.7″ x 13.2″
- Highpass filters: 60Hz, 80Hz, Off
- High Pass’ Switch: Flat: 25Hz, 2nd order / 60Hz: 60Hz, 2nd order / 80Hz: 80Hz, 2nd order
- LF’ Switch: +2: +2 dB low shelf 150Hz / 0: Flat / -2: -2 dB low shelf 150Hz
- MF’ Switch: 0: Flat / -2: -2 dB notch 450Hz Q0,7 / -4: -4 dB notch 450Hz Q0,7
- HF’ Switch: +1: +1 dB high shelf 1,5kHz / 0: Flat / -1: -1 dB high shelf 1,5kHz
