Sony LMD-1751W 17-Inch LCD Monitor
Sony LMD-1751W 17-Inch LCD Monitor
This 17-inch widescreen LCD monitor redefines high performance in the mid-market sector. It incorporates a 1280×768 WXGA LCD panel, displaying high brightness and contrast images with a superior viewing angle. Highly accurate and consistent colour reproduction is assured due to unique Sony ChromaTRU technology, enabling confident picture quality decisions as well as facilitating close colour matching for tiling applications.
Features:
- High resolution 1280×768 WXGA LCD Panel
- Extremely wide Viewing Angle
- High Purity Colour Filters
- Colour Temperature
- Accurate and Repeatable Colour Reproduction
- 10-bit Picture Processing
- Sophisticated I/P Conversion
- Multi-Format Signal Support – up to 3G SDI Input
- 3G SDI Input
- Computer Input Frequencies
- Signal Interface Options
- Quad Split functionality
- Video Waveform and Audio Level Meter
- Picture-In-Picture mode
- Selectable Scan Size and Aspect Ratio
- Multiple-Language On-Screen Display
- Advanced Video Markers
- Three Colour Tally
- Selectable Scan Size for Video Input and Aspect Ratio
- Smart APA (Auto Pixel Alignment) for Computer Input
- Remote Control Options
- Centralised Monitor-Wall Control
- Stereo Audio Monitoring
- Smart Function Key Lighting
- Protected Controls
- VESA Mounting Standard
- New features with BKM-250TG adaptor
Specifications:
- Picture Performance
- Panel: a-Si TFT Active Matrix LCD
- Picture Size (Diagonal):
- 431.1 mm
- 17 inches
- Effective Picture Size (H x V):
- 369.6 x 221.8 mm
- 14 5/8 x 8 3/4 inches
- Resolution (H x V): 1280 x 768 pixels (WXGA)
- Aspect: 15:9
- Pixel Efficiency: 0.9999
- Backlight: CCFL
- Colors: Approx.16.7 million colors
- Viewing Angle (Panel Specification): 89°/89°/89°/89° (typical) (up/down/left/right contrast 10:1)
- Normal Scan: 0% scan
- Over Scan: 5% over scan
- Input
- Composite Input: BNC (x1), 1 Vp-p ±3dB sync negative
- Y/C Input
- Mini DIN 4-pin (x1)
- Y: 1 Vp-p ± 3dB sync negative
- C: 0.286 Vp-p ± 3dB (NTSC burst signal level), 0.3 Vp-p ± 3dB (PAL burst signal level)
- RGB, Component Input:
- BNC (x3)
- RGB: 0.7 Vp-p ± 3dB (Sync On Green, 0.3 Vp-p sync negative)
- Component: 0.7 Vp-p ± 3dB
- DVI-D Input:
- DVI-D (x1)
- TMDS single link
- HD15 Input:
- D-sub 15-pin (x1)
- R/G/B: 0.7 Vp-p sync positive (Sync On Green, 0.3 Vp-p sync negative)
- Sync : Total level (polarity free, H/V separate sync)
- Plug & Play function : corresponds to DDC2B
- Audio Input: Phono jack (x2) -5 dBu 47 kΩ or higher
- External Sync Input:
- BNC (x1)
- 0.3 to 4.0 Vp-p ±bipolarity ternary or negative polarity binary
- Option Port:
- Two (2) ports
- Signal format: H: 15 kHz to 45 kHz, V: 48 Hz to 60 Hz
- Parallel Remote:
- Modular connector 8-pin (x1)
- (Pin-assignable)
- Serial Remote (LAN): D-sub 9-pin (RS-232C) (x1), RJ-45 (x1) (Ethernet, 10BASE-T/100BASE-TX)
- DC Input: XLR-type 4-pin (male) (x1), 12V DC (output impedance 0.05 Ω or less)
- Output
- Composite Output: BNC (x1), Loop-through, with 75 Ω automatic terminal function
- Y/C Output: Mini DIN 4-pin (x1), Loop-through, with 75 Ω automatic terminal function
- RGB, Component Output: BNC (x3), Loop-through, with 75 Ω automatic terminal function
- External Sync Output: BNC (x1), Loop-through, with 75 Ω automatic terminal function
- Audio Monitor Output: Phono jack (x2)
- Speaker (Built-in) Output: 1.0 W + 1.0 W (stereo)
- General
- Power Requirements:
- 100 V to 240 V AC, 0.8 A to 0.4 A, 50/60 Hz
- 12 V DC, 5.7 A
- Power Consumption: Approx. 77 W (max.) (with 2 x BKM-229X)
- Inrush Current:
- (1) Power ON, current probe method: 17 A (100 V), 26 A (240 V)
- (2) Hot switching inrush current, measured in accordance with European standard EN55103-1: 38A (230 V)
- Operating Temperature:
- 0°C to 35°C (Recommended: 20°C to 30°C)
- (32°F to 95°F (Recommended: 68°F to 86°F)
- Operating Humidity:
- 30% to 85% (no condensation)
- Storage/Transport Temperature:
- -20°C to +60°C
- -4°F to +140°F
- Storage/Transport Humidity:
- 0% to 90%
- Operating/Storage/Transport Pressure: 700 hPa to 1060 hPa
- Dimensions (W x H x D):
- 439.5 x 284.0 x 105.0 mm
- 439.5 x 385.7 x 269.9 mm (with SU-561 optional stand)
- 17 3/8 x 11 1/4 x 4 1/4 inches
- 17 3/8 x 15 1/4 x 10 3/4 inches (with SU-561 optional stand)
- Mass (with options):
- Approx. 8.8 kg (when SU-561 and 2x BKM-229X installed)
- Approx. 19 lb 6 oz (when SU-561 and 2x BKM-229X installed)
- Mass:
- Approx. 6.3 kg (when no monitor stand and no input adaptor installed)
- Approx. 13 lb 14 oz (when no monitor stand and no input adaptor installed)
- Supplied Accessories:
- AC power cord (1)
- AC plug holder (1)
- Operating Instructions (1)
- CD-ROM (1)
- Using the CD-ROM Manual (1)
- Optional Accessories:
- BKM-220D SDI 4:2:2 Input Adaptor
- BKM-243HS HD/D1-SDI Input Adaptor
- BKM-227W NTSC/PAL Input Adaptor
- BKM-229X Analog Component Input Adaptor
- BKM-244CC HD/SD-SDI Closed Caption Adaptor
- BKM-250TG 3G/HD/SD-SDI Input Adaptor
- MB-530 Mounting Bracket
- SU-561 Monitor Stand
- Power Requirements: