AKG C414 B-ULS Multi-Pattern Condenser Microphone
AKG C414 B-ULS Multi-Pattern Condenser Microphone
Classic large-diaphragm reference microphone; selectable cardioid, hypercardioid, omnidirectional or figure-eight polar patterns; two-stage pre-attenuation pad and bass cut filter; high sound pressure level capability – up to 160 dB SPL. The C414 B-ULS is THE reference microphone for almost all comparative microphone tests and one of the most used condenser microphones in the world. It is the microphone of choice for miking up vocals, grand pianos, percussions, and any other sound sources with complex waveforms. A gold-sputtered 1-inch dual-diaphragm and Ultra Linear Series electronics combine to provide an extremely smooth frequency response. Four selectable polar patterns allow the microphone to be used for every recording technique and two bass cut filters suppress low-frequency noise. Extremely low self noise and high headroom result in a dynamic range of 126 dB, which is wider than that of digital recording equipment. Switchable 10-dB and 20-dB pre-attenuation pads let you record instruments with sound pressure levels beyond 150 dB SPL at less than 0.5% THD. Complete with spider type suspension, windscreen, and individual frequency response printout.
Features:
- One of the world’s most celebrated studio condenser microphones
- Large 25 millimeter gold sputtered diaphragm format optimized for studio applications
- Dual diaphragm for multiple polar patterns
- High acoustic level capability (140 dB-SPL for 0.5% THD)
- Low self noise (14 dB-A)
Specifications:
- Transducer Principle: Condenser, externally polarized
- Frequency Range: 20–20,000 Hz
- Polar Pattern: Omnidirectional, cardioid, hypercardioid, and figure-eight
- Sensitivity at 1,000 Hz: 12.5 mV/Pa =^ -38 dBV
- Equivalent Noise Level: 14 dB-A
-
Sound Pressure Level for 0.5% THD:
- 134 dB, wide-band (unpadded)
- 140 dB, 1 kHz (unpadded)
- S/N Ratio (A-weighted): 80 dB
- Electr. Impedance: 180 ohms
- Load Impedance: > 1,000 ohms
-
Power Requirement:
- 12–48 volts nominal
- Phantom powering
- Connector: 3-pin XLR type
- Finish: Non-reflective black
- Size: 5.6 x 1.8 x 1.4 in. (141 x 45 x 35 mm)
- Net/Shipping Weight: 11 oz. (320 g)/2.1 lbs. (950 g)
-
Included Accessories:
- H 100 Elastic Suspension
- W 414 Windscreen
-
Optional Accessories:
- SA 18/3 B Stand Adapter
- B 18 Battery supply unit
- N 62 E Power supply
