Meyer Sound MILO Powered Line Array Loudspeaker Discount

Title

Touring Gear – Used

Meyer Sound MILO Powered Line Array Loudspeaker

MILO is a self-powered, four-way loudspeaker designed for vertical curvilinear arraying. It has ample power reserves (140dB SPL peak output at 1 meter) for high output level, longer throw applications in large venues, yet its weight and cabinet dimensions allow for its use in more compact spaces.

Features:

Extremely high power-to-size ratio for lower costs and flexible installation
Exceptional fidelity and peak capability assure clean, high-impact response
Seamless integration with other M Series models
QuickFly rigging system simplifies use in flown or ground-stacked arrays

Specifications:

Acoustical
- Operating Frequency Range: 60 Hz – 18 kHz
- Free Field Frequency Response: 65 Hz – 17.5 kHz ±4 dB
- Phase Response: 750 Hz – 16 kHz ±30°
- Maximum Peak SPL: 140 dB @ 1 m
- Dynamic Range: >110 dB
Coverage
- Horizontal Coverage: 90°
- Vertical Coverage: Varies, depending on array length and configuration
Crossover
- 560 Hz, 4.2 kHz
Transducers
- Low/Low-Mid Frequency:
  - Two 12″ cone drivers with neodymium magnets
  - Nominal impedance: 4 Ω
  - Voice coil size: 4″
  - Power-handling capability: 1200 W (AES)
- Mid-High Frequency:
  - One 4″ compression driver
  - Nominal impedance: 8 Ω
  - Voice coil size: 4″
  - Diaphragm size: 4″
  - Exit size: 1.5″
  - Power handling capability: 250 W (AES) on REM
- Very-High Frequency:
  - Three 2″ compression drivers
  - Nominal impedance: 12 Ω
  - Voice coil size: 2″
  - Diaphragm size: 2″
  - Exit size: 0.75″
  - Power handling capability: 100 W (AES)6 on REM
Audio Input
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient pro
- Connectors: ±15 V DC, clamped to earth for voltage transient protection
- Input Impedance: 10 kΩ differential between pins 2 and 3
- Wiring:
  - Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
  - Pin 2: Signal +
  - Pin 3: Signal –
  - Case: Earth ground and chassis
- DC Blocking: None on output, DC blocked through signal processing
- CMRR: >50 dB, typically 80 dB (50 Hz–500 Hz)
- RF Filter:
  - Common mode: 425 kHz
  - Differential mode: 142 kHz
- TIM Filter: Integral to signal processing (<80 kHz)
- Nominal Input Sensitivity: 0 dBV (1 V rms, 1.4 V pk) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing a minimum of +20 dBV (10 V rms, 14 V pk) into 600 Ω inorder to produce maximum peak SPL over the operating bandwidth of the loudspeaker
Amplifiers
- Type: Complementary power MOSFET output stages (class AB/H)
- Output Power: 3935 W (four channels; three x 1125 W, one x 560 W)
- THD, IM, TIM: <.02%
- Load Capacity: 4 Ω low, low-mid and very-high channels; 8 Ω mid-high channel
- Cooling: Forced air cooling, four fans (two ultrahigh-speed reserve fans)
AC Power
- Connector: 250 V AC NEMA L6-20 (twistlock) inlet, IEC 309 male inlet, or VEAM
- Automatic Voltage Selection: Automatic, two ranges, each with high-low voltage tap
- Safety Agency Rated Operating Range: 95 V AC – 125 V AC, 208 V AC – 235 V AC; 50/60 Hz
- Turn-on and Turn-off Points: 85 V AC – 134 V AC; 165 V AC – 264 V AC
- Current Draw:
  - Idle Current: 1.1 A rms (115 V AC);0.55 A rms (230 V AC);1.3 A rms (100 V AC)
  - Max Long-Term Continuous Current (>10 sec): 11.2 A rms (115 V AC);5.6 A rms (230 V AC);12.9 A rms (100 V AC)
  - Burst Current (<1 sec): 14.4 A rms (115 V AC);7.2 A rms (230 V AC);16.6 A rms (100 V AC)
  - Ultimate Short-Term Peak Current Draw: 32 A pk (115 V AC);16 A pk (230 V AC);37 A pk (100 V AC)
  - Inrush Current: 7 A (115 V AC and 110 V AC); 10 A (230 V AC)
RMS Network
- Equipped for two conductor twisted-pair network, reporting all operating parameters ofamplifiers to system operator’s host computer.
Physical
- Dimensions:
  - 54.00″ W x 14.47″ H x 22.00″ D
  - (1372 mm x 368 mm x 559 mm)
- Weight: 235 lbs (106.60 kg)
- Enclosure: Multi-ply hardwood
- Finish: Black textured
- Protective Grille: Powder-coated hex stamped steel
- Rigging: MRF-MILO rigging frame, custom AlignaLink connectors and quick release pins

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Meyer Sound MILO Powered Line Array Loudspeaker Discount