Christie Digital Roadster HD10K-M Video Projector
Christie Digital Roadster HD10K-M Video Projector
With a ruggedized, compact form factor, the Roadster HD10K-M projector provides high-performance and feature-rich options that you have come to expect in all Christie products. With embedded warping, blending and color matching, portrait capabilities and a wide variety of high-quality lenses that use our Intelligent Lens System (ILS™), the M series provides extensive installation flexibility for any application.
The Christie HD10K-M, at 10,000 ANSI lumens also offers high efficiency by giving you more brightness while using less power for a low cost of ownership. Combined with a 3-year warranty and our industry-leading service and support, the M Series offers performance and peace of mind.
Features:
- Contrast aperture – provides variable contrast ratio of 2500-10000:1 (Full on/off) for crisp, detailed images.
- LiteLOC™ – Advanced variable lamp output for color matching across multiple screens
- Comprehensive Color Adjustment (CCA™) – Individually adjust each RGB channel for even color matching
- Embedded Christie Twist™ image warping and edge-blending
- Multi-windowing and screen processing (up to a 2×3 array)
- Intelligent Lens System (ILS™) providing motorized zoom, focus, horizontal and vertical offset
- Digital keystone correction
- Two high definition input channels that allow 4:4:4 HD signals
- 3D upgradable
Specifications:
- ISO lumens: 11,250
- Center lumens: 11,000
- ANSI lumens: 10,000
- Contrast ratio: 10,000:1
- Display type: 0.95″ 3DLP
- Digital micromirror device: 3DLP – 3 x DMD
- Resolution: HD (1920 x 1080)
- Illumination type: Dual 350W lamp
- Illumination performance (hrs): Standard: 1500 hrs | Eco mode: 2000 hrs
- Orientation: Portrait OR 360° vertically
- Scan rates: Horizontal: 15 to 120 kHz / Vertical: 23.97 to 150 Hz
- Pixel clock rate: 165 MHz
- Standard inputs:
- Twin DisplayPort input card
- Dual-link DVI input card
- 3G SD/HD-SDI
- Optional inputs:
- Dual-link DVI
- Dual 3G SD/HD-SDI
- Twin HDMI w/Active loop through
- Twin DisplayPort input card
- Dual-link DVI input card
- 3G SD/HD-SDI
- Controls and networking:
- RS232 in/out
- RS422 in
- Ethernet (10/100)
- USB
- GPIO (RS232 9-pin male connector)
- Built-in backlit LCD keypad
- Remote control (with optional wired XLR connection)
- Optical system:
- Dust sealed, 3-Chip DMD light engine
- Scheimpflug (tilt) adjustment
- Built-in light shutter
- Motorized horizontal and vertical lens offset
- Tool-free lens insertion system
- Fixed lenses:
- 0.67:1 ILS lens
- 1.1:1 ILS lens
- Zoom lenses:
- 1.16-1.49:1 ILS lens
- 1.4-1.8:1 ILS lens
- 1.8-2.6:1 ILS lens
- 2.6-4.1:1 ILS lens
- 4.1-6.9:1 ILS lens
- 6.9-10.4:1 ILS lens
- Lens offsets:
- +/- 120% Vertical
- +/- 54% Horizontal
- ALL LENSES EXCEPT BELOW
- 0.67:1 (±35%V / ±12%H)
- 1.16-1.49:1 (±102%V / ±40%H)
- Enhanced feature sets:
- 99 channel memories
- Black level blending
- Auto setup
- Digital keystone correction
- 3D upgradable
- Dust sealed engine, filter-free design – Although the unit can be run without filters, Christie recommends using filters for assured performance
- Menus in five languages
- Power requirements:
- 110-240 VAC 50/60 Hz operating voltage
- 13.2 A @100V operating current
- 1320 W power consumption
- 4508 BTU/hr dissipation
- Dimensions (L x W x H):
- 22.1 x 19.7 x 10.2″
- 561 x 500 x 259mm
- Weight:
- 55lbs (25kg)
- Shipping weight: 87 lbs (39kg)
- Operating environment:
- Temp: 40 to 104° F (5 to 40° C)
- Humidity: 10-80% non-condensing
- Regulatory approvals:
- UL/CSA/IEC 60950 (3rd edition)
- FCC Class A, CE, CCC
- This product conforms to all relevant European directives, standards, safety, health and environmental concerns
- RoHS, WEEE
- Limited warranty: Three years parts and labor (including light engine)
