Allen & Heath AH-DT164-W 16 Input x 4 Output Dante Audio Expander Wall Box – 48kHz / 96kHz
Allen & Heath AH-DT164-W 16 Input x 4 Output Dante Audio Expander Wall Box – 48 KiloHertz / KiloHertz
DT164-W provides 16 microphone preamps and 4 line outputs in a versatile wall-mount design for permanent installation.
Features:
- Dante audio expander (96kHz / 48kHz)
- Wall mount or dip trap installation
- 16 mic preamps on XLR with Phantom Power status LEDs
- 4 XLR Line Outs
- Primary and Secondary Dante ports with locking EtherCon
- Redundant or Switched mode
- Direct preamp control from dLive, Avantis, AHM-64 and SQ
- Dante Domain Manager ready
- Remote control of preamps via DT Preamp Control software for integration with 3rd party systems
- 3 power supply options: 100-230V AC powered on IEC or screw terminal blocks, as well as 12V DC power DC power can be used as redundant power supply
- Can fit in a standard NEMA box (custom brackets required)
- Compatible with ACE Backstage 174SLBK stage pocket system
- AES67 compatible
Specifications:
- Mic/Line XLR Inputs: Balanced XLR, +48V phantom power
- Mic/Line Preamp: Fully recallable
- Input Sensitivity: -60 to +15dBu
- Analogue Gain: +5 to +60dB, 1dB steps
- Pad: -20dB Active PAD
- Maximum Input Level: +30dBu (PAD in)
- Input Impedance: >4kΩ (Pad out), >10kΩ (Pad in)
- Mic EIN: -127dB with 150Ω source
- Analogue XLR Outputs: Balanced, Relay protected
- Output Impedance: <75Ω
- Nominal Output: +4dBu = 0dB meter reading
- Maximum Output Level: +22dBu
- Residual Output Noise:
- -92dBu (muted, 20-20kHz)
- -90dBu (muted, 20-40kHz)
- Dante:
- Sample rate: 48kHz or 96kHz
- Bit Depth: 24 Bit
- Gain, Pad, 48v Control: Allen & Heath dLive, Avantis, AHM-64 or SQ system
- Operating Temperature Range: 0°C to 40°C (32°F to 104°F)
- Power:
- Mains Voltage Operating Range: 100-240V AC, 50/60Hz
- Mains Power Consumption: 40W max
- DC Input: 12V DC, 3A max
- Dimensions and Weight (Width x Depth x Height x Weight): 210 x 87 x 210 mm x 3.2kg (8.25” x 3.5” x 8.25” x 7lbs)
