American DJ PRO 38 B LED RC 12x1W RGB DMX Par
American DJ PRO 38B LED RC 12x 1W RGB DMX Par with Wireless Remote Included
The ADJ PRO38B RC is high output black Par Can with twelve 1-Watt LEDs that is ideal for lighting up stages, dance floors and entertainment venues. The fixture’s RGB color mixing allows users to get a full spectrum of color from one Par Can. The PRO38B RC features an Infrared wireless remote to control what would normally require a DMX controller or adjustments made by hand on the rear panel. Aim the wireless remote at the unit and control features such as: Black Out, built-in programs, flash, DMX addressing and RGB color change.
This fixture uses LEDs rated at 50,000 hours with a maximum power draw of 15W. DMX addressing may also be changed by the unit’s 3-button LED display. The PRO38B RC has a dual hanging bracket that makes it easy to set on the floor.
Features:
- Black Ultra bright Par 38 with 12x 1-Watt LEDs (4 Red, 4 Green, and 4 Blue LEDs)
- Great for performance stages where traditional par cans emit a lot of heat onto performers
- Includes wireless infrared remote control up to 15 ft./4.5M (Model: ADJ LED RC)
- 7 DMX Channel modes: 1, 2, 3, 4, 5, 6 or 7 channel modes
- 6 Operational modes: Manual Color Mode; Color Change Mode; Color Fade Mode; Auto (Program Run) Mode; Sound Active Mode and DMX-512 Mode
- Smooth RGB color mixing (fast or slow color change operation)
- Flicker-free operation for film and television
- 32 built-in Color Macros
- Color strobe effect
- Electronic Dimming: 0 – 100%
- Beam angle: 30-degree
- Linkable via 3-pin XLR cable (In/Out)
- 3-button LED display on rear panel
- Dual bracket system allows fixture to be hung or set on the ground
- Power Draw: 15W max
- ETL and ETLC Approved
- Run all night – No duty cycle
- Long Life LEDs (50,000 hrs.)
- Multi-voltage: 120-240V, 50/60Hz
- Dimensions (LxWxH): 7.25″ x 7.25″ x 9.5″
- Weight: 4 lbs.
ADJ LED RC Infrared Remote Control Features:
- Black Out: Turns fixture On/Off
- Auto Run: Automatically run through built-in programs
- Program Selection: Access units built-in programs
- Flash: Strobe effect
- Speed: Control speed of Auto Run
- DMX Mode Select
- Sound Active: Activates sound active mode
- Slave: Designates the fixture as a “slave” fixture in the Master/Slave configuration
- Set Address: Set DMX Address on a fixture
- RGB Buttons: Adjust RGB colors with the “+” and “-” buttons
- + and – Buttons: Adjust flash rate, speed of the Auto Run and Program Selection
