Audio-Technica AT8532 Belt Pack Power Module for ATM35BP
Audio-Technica AT8532 Belt Pack Power Module for ATM35BP
****Beltpack Only*****
A cardioid condenser clip-on instrument microphone which will clip to brass, reeds, piano, acoustic bass, snare, and toms. It has a crisp, clear, well-balanced response, even at high SPLs. UniMount® clip permits accurate positioning while protecting the element. Operates on battery or phantom power (has its own power supply).
Specifications:
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar pattern: Cardioid
- Frequency response: 30-20,000 Hz
- Low frequency roll-off: 150 Hz, 12 dB/octave
- Open circuit sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa
- Impedance: 200 ohms
- Maximum input sound level: 145 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic range (typical): 118 dB, 1 kHz at Max SPL
- Signal-to-noise ratio: 67 dB, 1 kHz at 1 Pa
- Phantom power requirements: 11-52V DC, 2 mA typical
- Battery type: 9V
- Battery current/life: 1 mA / 1000 hours typical
- Switch On-flat, on-roll-off (phantom) | Off, on-flat, on-roll-off (battery)
- Weight (microphone): 0.3 oz (8.5 g)
- Weight (power module): 5.4 oz (153 g)
- Dimensions (microphone): 1.39″ (35.2 mm) long, 0.47″ (12.0 mm) diameter
- Dimensions (power module): 3.78″ (96.0 mm) H x 2.48″ (63.0 mm) W x 0.87″ (22.0 mm) D
- Output connector (power module): integral 3-pin XLRM-type
- Cable: 25′ (7.6 m) long (permanently attached to microphone), with TA3F output connector that mates with TB3M jack on power module
