Audio Technica ATW-T801-T2 System 08 Bodypack Transmitter
Audio Technica ATWT801T2 System 08 Bodypack Trans
Featuring sleek, stackable, contemporary styling, Audio-Technica’s System 8 Wireless Systems are designed for reliable performance, easy setup and clear, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, these single-channel, fixed-frequency systems are available in three traveling VHF frequencies (169.505, 170.245, and 171.905 MHz).
Features:
- Easy operation and clear, natural sound quality
- Reliable performance and durable construction
- Advanced dipole antenna system for extended operating range
- Power, RF, and AF Peak indicators
- Volume control, 1/4″ output jack and user-adjustable squelch
- Rugged unidirectional dynamic element on handheld microphone/transmitter
- Variable microphone trim control and multi-color battery/power indicator, AA operation on transmitters
- Professional locking connector on UniPak body-pack transmitter
- Available in 7 system configurations
Specifications:
- Operating Frequency: VHF highband, 169 MHz to 172 MHz
- Modulation Mode: FM
- Maximum Deviation: +/-10 kHz
- Dynamic Range: >/=90 dB (A-weighted), typical
- Total Harmonic Distortion: <1% (at 1 kHz, +/-10 kHz deviation)
- Operating Range: 200′ (60 m) typical
- Open range environment with no interfering signals
- Operating Temperature Range: 40 degree F (4 degree C) to 110 degree F (43 degree C)
- Battery performance may be reduced at very low temperatures
- Frequency Response: 80 Hz to 13 kHz
Receiver Specifications:
- Receiving System: Non-diversity, single-channel, dual antenna system
- Image Rejection: 50 dB minimum
- RF Sensitivity
- 20 dBuV at 60 dB S/N ratio (50 ohms termination)
- Audio Output: 1/4″ (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load), nominal
- Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
- Dimensions: 7.48″ (190.0 mm) W x 1.82″ (46.2 mm) H x 5.06″ (128.5 mm) D
- Net Weight: 11.8 oz (335 grams)
Accessory IncludedBody-pack Transmitter Specifications
- RF Power Output: 10 mW
- Spurious Emissions
- Following federal and national regulations
- Input Connections: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +9V
- Batteries: Two 1.5V AA Alkaline (not included)
- Battery Life: 8 hours (alkaline)
- Depending on battery type and use pattern
Dimensions
- 2.76″ (70.2 mm) W x 4.08″ (103.7 mm) H x 0.98″ (24.9 mm) D
- Net Weight: 3.0 oz (84.5 grams)(without battery)
Handheld Transmitter Specifications
- RF Power Output: 10 mW
- Spurious Emissions
- Following federal and national regulations
- Batteries: Two 1.5V AA Alkaline (not included)
- Battery Life: 8 hours (alkaline)
- Depending on battery type and use pattern
Dimensions
- 9.91″ (251.8 mm) long,
- 2.11″ (53.5 mm) diameter
