Audio Technica Subminiature Lavalier Mic Beige
Audio Technica Subminiature Lavalier Mic Beige
With a capsule diameter not much bigger than the head of a pin, Audio-Technica’s smallest-ever lavalier microphone virtually disappears in props or clothing to create highest-quality audio for broadcast and theater sound reinforcement.
The BP896 MicroPoint™ omnidirectional lavalier delivers extremely intelligible natural audio and handles high sound pressure levels with ease. Its subminiature omni element is enclosed in a durable housing designed to minimize noise from handling, clothing and wind. Flip a switch to eliminate low-frequency hum without affecting intelligibility.
Offered in wired & wireless models, the BP896-TH comes generously equipped with an extensive accessory kit—mic holders, windscreens, element covers & more.
Features:
- Inconspicuous, lightweight capsule
- Extremely intelligible natural audio
- Handles high sound pressure levels with ease
- Rugged built for long-lasting performance
- High-pass UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Requires 11V to 52V DC phantom power
- Includes generous accessory kit & protective case
- RoHS compliant—free from all substances specified in the EU directive on hazardous substances
- BP896-TH – same as BP896, but in “theater” color (beige). Available in black and beige, wired and wireless models:
- BP896 – includes AT8539 power module
- BP896c – less power module; 1.4 m (55″) cable, unterminated
- BP896c-TH – same as BP896c, but in “theater” color (beige)
- BP896cW – less power module; 1.4 m (55″) cable terminated with locking 4-pin connector for A-T UniPak® wireless systems
- BP896cW-TH – same as BP896cW, but in “theater” color (beige)
- BP896cL4 – less power module; 1.4 m (55″) cable terminated for Sennheiser wireless systems using Lemo connector
- BP896cL4-TH – same as BP896cL4, but in “theater” color (beige)
- BP896cLM3 – less power module; 1.4 m (55″) cable terminated for Sennheiser wireless systems using locking 3.5 mm connector
- BP896cLM3-TH – same as BP896cLM3, but in “theater” color (beige)
- BP896cT4 – less power module; 1.4 m (55″) cable terminated with TA4F-type connector for Shure wireless systems
- BP896cT4-TH – same as BP896cT4, but in “theater” color (beige)
- BP896cT5 – less power module; 1.4 m (55″) cable terminated with TA5F-type connector for Lectrosonics wireless systems
- BP896cT5-TH – same as BP896cT5, but in “theater” color (beige)
Specifications:
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Omnidirectional
- Frequency Response: 20-20,000 Hz
- Low Frequency Roll-Off: 80 Hz, 18 dB/octave (wired only)
- Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
- Impedance: 250 ohms (wired only)
- Maximum Input Sound Level: 135 dB SPL, 1 kHz at 3% T.H.D.
- Dynamic Range (typical): 104 dB, 1 kHz at Max SPL (wired only)
- Signal-To-Noise Ratio: 63 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 2 mA typical (wired only)
- Switch: Flat, roll-off (wired only)
- Current Consumption: 0.1 mA typical at 5V (wireless only)
- Voltage Range: 2.5-11V (wireless only)
- Weight (Microphone): 0.14 g (0.005 oz)
- Weight (Power Module): 85 g (3.0 oz) (wired only)
- Dimensions (Microphone):
- 10.8 mm (0.43″) long,
- 2.6 mm (0.10″) diameter
- Dimensions (Power Module):
- 97.6 mm (3.84″) long,
- 18.9 mm (0.74″) diameter (wired only)
- Output Connector (Power Module): Integral 3-pin XLRM-type
- Cable: 1.4 m (55″) long (permanently attached to microphone), 1.6 mm (0.06″) diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
- Accessories Furnished: BP896-TH: AT8539 power module (wired only); two AT8157-TH windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 beige single mic holders; 2 beige double mic holders; belt clip (wired only); carrying case
- Audio-Technica Case Style: M39
