Audio Technica U891RWX Condenser Boundary Mic – Wt
Audio Technica U891RWX Condenser Boundary Mic – Wt
- Designed to deliver easy, flexible control in conference and boardroom installations, the versatile U891R cardioid condenser boundary microphone features an activation switch that can be set to three modes: press-on/press-off, press to talk, and press to mute. The phantom-powered microphone is equipped with a unique PivotPoint rotating output connector and an LED status indicator. UniGuard innovations offer unsurpassed immunity from radio frequency interference; interchangeable elements are available in cardioid, hypercardioid and omnidirectional polar patterns; an 80 Hz low-cut UniSteep filter reduces pickup of low-frequency ambient noise. The microphone’s heavy die-cast case and silicon foam bottom pads minimize coupling of surface vibration to the microphone. The unit’s self-contained electronics eliminate the need for an external power module.
Features:
- Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
- An activation switch can be set to any of three operating modes: “touch-on/ touch-off,” “touch-to-talk” and “touch-to-mute”
- PivotPoint rotating output connector allows cable to exit from either the rear or the bottom of the microphone
- Superior off-axis rejection for maximum gain before feedback
- UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance
- Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
- Low-profile design with low-reflectance finish for minimum visibility
- Improved switch design
- Available in two colors: black (U891Rx) and white (U891RWx)
Specifications:
- Fixed-charge back plate, permanently polarized condenser
- Half-cardioid (cardioid in hemisphere above mounting surface)
- Frequency Response: 30-20,000 Hz
- Low Frequency Roll-Off: 80 Hz, 18 dB/octave
- Open Circuit Sensitivity: –34 dB (19.9 mV) re 1V at 1 Pa
- Impedance: 200 ohms
- Maximum Input Sound Level: 130 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range (typical): 104 dB, 1 kHz at Max SPL
- Signal-To-Noise Ratio: 68 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 4 mA typical
- Activation Switch: on/off;
- Switch function: press on/off,
- Momentary on, momentary off;
- Flat, roll-off
- Weight: 264 g (9.3 oz)
- Dimensions: 108.0 mm (4.25″) maximum length, 84.0 mm (3.31″) maximum width, 23.0 mm (0.91″) maximum height
- Output Connector: TB3M-type
- Cable: 7.6 m (25.0′) long, 3.2 mm (0.13″); diameter, 2-conductor, shielded cable with; TA3F-type and XLRM-type connectors
- Optional Interchangeable Elements: UE-O omnidirectional (360&); UE-H hypercardioid (100&)
- Accessory Furnished:
- Soft protective pouch
