Clear-Com Intercom System Basic Encore Wired Bundle with 6 Headsets
Clear-Com Basic Encore Wired System Bundle
Bundle Includes:
- 1x Clear-Com MS-702 Main Intercom Station
- 6x Clear-Com CC-300 Single-Ear Standard Headset
- 6x Clear-Com RS-701 Encore Partyline Belt Pack
Clear-Com CC-300 Single-Ear Standard Headset
The CC-300 single-ear headset features high ambient-noise attenuation headphones and a hyper-cardioid dynamic microphone that provide high quality audio. The headset has a flexible design and a soft-ear pad to offer superior comfort. Able to rotate 300 degrees, the microphone boom acts as an on/off switch for quick microphone muting.
Clear-Com RS-701 Encore Partyline Belt Pack
The RS-701 is a single-channel analog belt pack with an XLR-3 line connector and XLR-4M headset connector. A microphone preamp with a dynamic range of 130dB enables intelligible voice communication for every volume level, from a whisper to a shout. The belt pack also combines high headroom, low-noise audio and shaped frequency contour (Clear-Com Sound) to deliver crystal-clear audio. The RS-701 is compatible with all Encore partyline products, as well as the PL-Pro line and other partyline systems via Encore interfaces.
Clear-Com MS-702 Main Intercom Station
Compact, feature-laden, single rack-space intercom main station supports up to 40 RS-701 beltpacks, 10 speaker stations or 12 headset stations on two channels.
Clear-Com CC-300 Features:
- Type: closed-back
- Driver: 40mm diameter, neodymium magnet, copper-clad aluminium wire voice coil
- Headphone frequency response: 40Hz – 20kHz
- Microhpone element: dynamic
- Microphone polar pattern: hyper-cardioid
- Microphone frequency response: 300Hz – 20kHz
- Open circuit sensitivity: -61.0 dB ±3.5 dB; at 1kHz, typical, 102 dB ±3 dB; at 1kHz typical
- Impedance: 400 ohms ±30%; at 1kHz typical
- Microphone: 200 ohms ±30%; at 1kHz typical
- Connector cable: 5ft (1.55m) long with 8-pin connector at headset end; 4-pin Female XLR
- Includes drawstring carry bag
Clear-Com RS-701 Features:
- Microphone pre-amplifier
- Microphone to Line (without limiter acting) frequency response: 280 – 15k Hz ± 3dB
- Microphone output to line – audio level (-50dBm Electret input): -9dBm
- Microphone output to line – distortion: <0.1%
- Microphone output to line – signal to noise: >65dB
- Clear-com sound: yes
- Headphone amplifier
- Frequency response – line to headphone: 150 – 20k Hz ± 3dB
- Headphone input from line – audio level (-9dBm Electret input): 3.5dBm
- Headphone input from line – distortion: <0.5%
- Headphone input from line – signal to noise: >50dB
- Earphone to mic – crosstalk: >80dB
- Sidetone – adjustment range (-80db mic input): >45dB
- Keypad indicators: power: green LED; talk: green LED; call: orange LED
- Connectors: intercom line: (2) 3-pin XLR–M–F: channel 1 2-Wire intercom channel pin 1: common; Pin 2: PL power (+28VDC); pin 3: line (Audio)
- Headset: 4-pin XLR–M: headset connector pin 1: mic – (Mic Common); pin 2: mic +; pin 3: spkr-; pin 4: spkr+ (&0.5*VCCDC supply between pin 4 & pin 1)
- Power requirements: 13mA Quiescent; 24mA average talk; 28mA Talk with signaling; DC voltage range: 12-30 VDC
- Operating temperature range: 0?C – 70?C (32?F – 158?F)
- Storage temperature range: 0?C – 70?C (32?F – 158?F)
- Relative humidity: 0 – 90% non condensing
- Dimensions: 3.4″ x 4.5″ x 1.7″ / 86.4 mm x 114.3 mm x 43.2 mm (HxWxD)
- Weight: 0.66 lbs. / 0.30 kg
Clear-Com MS-702 Features:
- Channel A-B linking
- Program input with individual channel level controls
- Remote mic kill switch
- External relay circuit
- Stage announce
- Dimensions: 19″ x 1.75″ x 6.5″ (WxHxD)
