Community V2-26WT 2×6.5-inch 2-Way Speaker White
Community V2-26WT 2×6.5-inch 2-Way Speaker White
The V2-26 is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. This versatile model is ideal for distributed systems such as those found in cafés, restaurants, shopping centers and airports. With its powerful dual cone drivers, the V2-26 provides additional low frequency and midrange output over that of its sister product, the V2-6. When paired with a subwoofer such as the V2-210S, a V2- 26 system will produce high-fidelity, broad spectrum sound that belies its modest size. In addition to distributed systems, the V2- 26 is an excellent choice for ancillary delay applications. When used to augment a front-of-house system in venues such as auditoria, theaters and houses of worship, delay loudspeakers can significantly even out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for underbalcony fill, overbalcony fill, or simply placed towards the rear of the seating areas. By deploying V2-26 loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation. The V2-26 may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device. It includes a rotatable horn design that allows optimal dispersion in either vertical or horizontal mounting positions.
Applications:
- Houses of worship
- Restaurants, pubs, cafés
- Shopping malls, retail environments
- Airports
- Delay fill
Features:
- Dyna-Tech™ driver protection circuitry
- Ferrofluid-treated HF driver for improved heat dissipation
- Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability
- Constant-directivity rotatable square horn
- Frequency shaded woofers for smooth vertical pattern control
- Terminal strip and NL4-compatible connectors
- Available in standard white finishes
- Mounting yoke included with 10° and 20° vertical standoffs
- Optional V2-26T built-in autoformer model for 70V/100V applications
Specifications:
- Loudspeaker Type: Compact two-way, full-range, trapezoidal, vented bass, frequency shaded LF, user rotatable horn
- Operating Range: 70 Hz to 18 kHz (-10 dB)
- Frequency Response: 90 Hz to 16 kHz (±3 dB)
- Max Input Ratings:
- 200W continuous, 500W program
- 28.3 volts RMS, 56.7 volts momentary peak
- Sensitivity (1W/1m): 92 dB (100 Hz to 12.5 kHz) free space
- Maximum Output: 115 dB SPL / 121 dB SPL (peak)
- Nominal Impedance: 4 ohms
- Minimum Impedance: 3.5 ohms @ 220 Hz
- Nominal –6dB Beamwidth: 90° H x 70° V (in vertical position)
- Crossover Frequency: 1.3 kHz
- Recommended Signal Processing: 80 Hz, 24 dB/octave Butterworth high pass filter
- Drivers:
- LF 2 x 6.5-inch cone
- HF 1 x 1-inch
- Driver Protection: Dyna-Tech protection circuitry
- Input Connection: NL4-compatible lockingconnector with terminal strip in parallel
- Controls: None
- Enclosure:
- Trapezoidal (22.5° included angle)
- 18mm, 11-ply cross-laminated birch
- Mounting/Rigging Provisions:
- 9 x M6 threaded rigging fittings
- 4 x M6 threaded fittings for V-HSS and third-party suspension products
- Finish: Catalyzed polyester white paint
- Grille: Powder coated steel white finish
- Controls: None
- Supplied Accessories:
- Yoke-style mounting bracket with optional
- 10° and 20° standoffs that allow a 10° or 20° downward or upward vertical tilt
- Optional Accessories:
- CMKIT ceiling mount kit
- V-HSS handle and stand socket
- VB-TILT tilting bracket
- VB-VY26 vertical yoke bracket
- M6EYBLTKIT 6mm eyebolt kit
- Width: 22.5 inches (573 mm)
- Depth: 9.8 inches (249 mm)
- Weight: 10.1 inches (258 mm)
- Model Options:
- V2-26B (low impedance, black finish)
- V2-26W (low impedance, white finish)
- V2-26BT (built-in autofomer for 70V100V applications, black finish)
