Crestron DMC-4K-CO-HD-HDCP2 2-Channel 4K Output Card for DM
Crestron DMC-4K-CO-HD-HDCP2 2-Channel 4K Output Card for DM
The DMC-4K-CO-HD-HDCP2 is an output card designed for use with any card-based Crestron® DigitalMedia™ Switcher. It provides two independent DM 8G+® outputs, plus one HDMI® output. The HDMI output carries the same signal as the first DM 8G+ output. Both DM 8G+ outputs are compatible with HDBaseT®. Using a single CAT type twisted pair cable, each DM 8G+ output enables connection to a DM 8G+ receiver, the input of another DM® switcher, or an HDBaseT certified display device or receiver.[1]
4K Ultra HD- All outputs on the DMC-4K-CO-HD-HDCP2 are capable of handling video resolutions up to 4K and Ultra HD. Support for 4K video also ensures support for the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA.
DigitalMedia 8G+®- Engineered for ultra high-bandwidth and ultimate scalability, DigitalMedia 8G+ (DM 8G+) provides a true one-wire lossless transport for moving high-definition video, audio, power, Ethernet, and control signals over twisted pair copper wire. DM 8G+ transports uncompressed Full HD 1080p, WUXGA, and 2K signals over distances up to 330 feet (100 m) using Crestron DM Ultra Cable, Crestron DM 8G® Cable, or third-party CAT5e. Higher resolution signals up to UHD and 4K are supported over distances up to 330 feet (100 m) using DM Ultra Cable, 230 feet (70 m) using DM 8G Cable, or 165 feet (50 m) using CAT5e.[1]
HDBaseT® Certified- Crestron DigitalMedia 8G+ technology is designed using HDBaseT Alliance specifications, ensuring interoperability with other HDBaseT certified products. Either DM 8G+ output can be connected directly to an HDBaseT compliant device without requiring a DM receiver.
Bonus HDMI® Output- A single HDMI output is included on the DMC-4K-CO-HD-HDCP2, which functions in parallel with the first DM 8G+ output. Both outputs may be used simultaneously to split a single switched signal to feed two separate devices.
CEC Embedded Device Control- DigitalMedia offers an alternative to conventional RS-232 and IR display control by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to a control system (via the DM switcher), the DMC-4K-CO-HD-HDCP2 provides a gateway for controlling display devices right through their HDMI or HDBaseT connections, potentially eliminating the need for any dedicated control wires or IR emitters.
Power over DM®- Power over DM (PoDM) technology affords a true one-wire solution by supplying power to each connected device over the same wire that carries video, audio, and data signals. To enable PoDM power sourcing through either DM 8G+ output port (DM OUT), simply connect a compatible PoDM or PoE power source to its companion PoE/PoDM input port (POE IN). Compatible power sources include Crestron models DM-PSU-8, DM-PSU-16, DM-PSU-ULTRA-MIDSPAN, and CEN-SWPOE-16, or any IEEE 802.3af or 802.3at compliant PoE PSE (Power Sourcing Equipment).
Support for PoDM+ is enabled using a DM-PSU-ULTRA-MIDSPAN, CEN-SWPOE-16, or third-party 802.3at Type 2 PSE. PoDM++ power sourcing is enabled using a DM-PSU-ULTRA-MIDSPAN. PoDM may also be used to power HDBaseT PoE powered devices.[2]
To configure a DM switcher complete with input and output cards, cables, and other peripherals, please use Crestron’s online DigitalMedia Switcher Configuration Tool.
Are you upgrading an existing DM switcher that has older “multi-gang” DMCO-series output cards? Use Crestron’s online Output Card Additions and Upgrades Tool to update your existing output cards and switcher to the new “single-gang” output card format.
Please refer to the DigitalMedia Resources Webpage at http://www.crestron.com/dmresources/ for additional design tools and reference documents.
Key Features
- Modular output card for a DM-MD8X8, DM-MD16X16, or DM-MD32X32 switcher
- Provides two independent 4K DM 8G+® outputs
- HDBaseT® Certified — Enables direct connection to other HDBaseT certified equipment
- Includes a parallel HDMI® port on the first output
- Handles video resolutions up to 4K and Ultra HD
- Handles 3D video and Deep Color
- Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio
- HDCP 2.2 compliant
- Supports cable lengths up to 330 ft (100 m) for all resolutions up to UHD and 4K using DM® Ultra cable [1]
- Supports cable lengths up to 330 ft (100 m) for 1080p, WUXGA, and 2K using DM 8G® cable or CAT5e [1]
- Supports cable lengths up to 230 ft (70 m) for UHD and 4K using DM 8G cable, or 165 ft (50 m) using CAT5e [1]
- Enables HDMI and HDBaseT device control via CEC
- Supports PoDM and HDBaseT PoE power sourcing [2]
- Occupies a single DM switcher output card slot
Specifications
- Maximum Cable Lengths
- DM-CBL-ULTRA DigitalMedia™ Ultra Cable
- 330 ft (100 m)
- 1080p60 Full HD
- 1920×1200 WUXGA
- 1600×1200 UXGA
- 2048×1080 DCI 2K
- 2560×1440 WQHD
- 2560×1600 WQXGA
- 3840×2160 4K UHD
- 4096×2160 DCI 4K
- DM-CBL-8G DigitalMedia 8G™ Cable
- 330 ft (100 m)
- 1080p60 Full HD
- 1920×1200 WUXGA
- 1600×1200 UXGA
- 2048×1080 DCI 2K
- 230 ft (70 m)
- 2560×1440 WQHD
- 2560×1600 WQXGA
- 3840×2160 4K UHD
- 4096×2160 DCI 4K
- CAT5e (or better) [1]
- 330 ft (100 m)
- 1080p60 Full HD
- 1920×1200 WUXGA
- 1600×1200 UXGA
- 2048×1080 DCI 2K
- 165 ft (50 m)
- 2560×1440 WQHD
- 2560×1600 WQXGA
- 3840×2160 4K UHD
- 4096×2160 DCI 4K
- Video
- Output Signal Types: DM 8G+ & HDBaseT w/Deep Color, 3D, & 4K; HDMI w/Deep Color, 3D, & 4K (DVI compatible [3])
- Maximum Resolutions:
- Progressive
- 4096×2160 DCI 4K & 3840×2160 4K UHD
- 24 Hz / 4:4:4 / 30 bit
- 30 Hz / 4:4:4 / 24 bit
- 30 Hz / 4:2:2 / 36 bit
- 60 Hz / 4:2:0 / 24 bit
- 2560×1600 WQXGA
- 60 Hz / 4:4:4 / 36 bit
- 1920×1080 HD 1080p
- 60 Hz / 4:4:4 / 36 bit
- Interlaced
- 1920×1080 HD 1080i
- 30 Hz / 4:4:4 / 36 bit
- NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz
- Audio
- Output Signal Types: DM 8G+, HDBaseT, HDMI
- Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels
- Communications
- Connectors
- DM OUT:
- (2) 8-pin RJ45 female, shielded;
- Comprises (2) DM 8G+ outputs, HDBaseT compliant;
- PoDM PSE port (HDBaseT PoE compatible) [2];
- Each connects to the DM 8G+ input of a DM receiver or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [1]
- POE IN:
- (2) 8-pin RJ45 female;
- Comprises (2) PoE/PoDM inputs;
- Each connects to one port of an IEEE 802.3af or 802.3at compliant PoDM or PoE PSE (Power Sourcing Equipment) to enable PoDM or HDBaseT PoE power sourcing via the corresponding DM OUT port. Compatible with PoE+, PoDM+, and PoDM++. Supports Crestron models DM-PSU-8, DM-PSU-16, DM-PSU-ULTRA-MIDSPAN, and CEN-SWPOE-16.[2]
- HDMI:
- (1) 19-pin Type A HDMI, female;
- HDMI digital video/audio output (DVI compatible [3]);
- Outputs same signal as the first (left) DM OUT port
- Indicators
- DM OUT: (4) LEDs, green LEDs indicate DM link status, amber LEDs indicate video and HDCP signal presence, for each corresponding DM 8G+ output
- Construction
- Plug-in card, occupies (1) DM switcher output card slot, includes metal faceplate w/black finish
- Weight
- 6.2 oz (176 g)
- DigitalMedia: DM 8G+, HDCP 2.2, EDID, CEC, PoDM, PoDM+, PoDM++, Ethernet HDBaseT: HDCP 2.2, EDID, CEC, RS-232, PoE, PoE+, Ethernet HDMI: HDCP 2.2, EDID, CEC NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI and HDBaseT devices and a control system
1. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.
2. To enable PoDM or HDBaseT PoE power sourcing via either DM OUT port, the corresponding POE IN port must be connected to a PoDM power supply (DM-PSU-8, DM-PSU-16, or DM-PSU-ULTRA-MIDSPAN) or an 802.3af or 802.3at compliant PoE PSE (CEN-SWPOE-16 or third-party). PoDM+ and HDBaseT PoE+ are supported using the DM-PSU-ULTRA-MIDSPAN, CEN-SWPOE-16, or other 802.3at Type 2 Class 4 compliant PoE+ PSE. PoDM++ power sourcing is supported using the DM-PSU-ULTRA-MIDSPAN. Refer to the connected DM 8G+ or HDBaseT devices for their PoDM or HDBaseT PoE capabilities and requirements. Any wiring that is connected to a PoDM, PoE, or HDBaseT PoE PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located.
3. DVI is supported via the HDMI output using a suitable adapter or interface cable. CBL-HD-DVI interface cables are available separately.
