DBX 160XT Single Channel Compressor Limiter on Sale

DBX 160XT Single Channel Compressor Limiter

DBX 160XT Single Channel Compressor Limiter

The dbx 160XT is capable of handling a wide range of applications. In the studio, the 160XT can _be used on everything from vocals to percussion. In live sound reinforcement, the 160XT can allow the engineer to get that “fat studio sound” out of the drum kit or provide protection limiting for the speakers. In radio or television broadcast, the 160XT will produce stable voice levels, even with non-professional subjects.

Features:

• XL-type Input and Output Connectors – be­cause the 3-pin XL connector has been recog­nized as the most durable and widely used connector for professional applications.
• Balanced Output – can drive a 600Ω load to +24dBu and provides common-mode rejec­tion of unwanted noise in the audio path such as RF and 60Hz components.
• True Power Summing – When two 160XT units are slaved together, the RMS energy of the sig­nal presented to the slave unit is summed with the RMS energy of the signal presented to the master unit to prevent phase cancella­tion of the two signals from causing unmusi­cal compressor action. Note: a 160X unit can also be used with the same results as long as the 160XT is used as the master unit.
• Input Ground-Lift Switch – for isolation be­tween shield ground and signal ground. Use­ful when troubleshooting hum (AC line interference).
• OVER EASy® /Hard Knee Selection – allows selection between our famous Over Easy com­pression curve and the classic “Hard Knee” curve popularized by the original dbx 160, 161 and 162.
• True RMS Level Detection – senses the power in the program in a musical manner, much as the ear does, giving results superior to peak or average detection.
• Hardwire System Bypass Switch -allows the audio to pass even if the unit is unplugged, and is also useful for comparing the pro­cessed and unprocessed signal.
• Front Panel Stereo Coupling Switch – couples two 160XTs or a 160XT and a 160X together for stereo operation at the push of a button.
• 19 Segment Display – for high resolution mon­itoring of True RMS input and output levels.
• 12 Segment Display – indicating GAIN REDUCTION.
• Meter Calibration – input/ output meter cali­bration, so the 160XT can be used in a variety of situations where the “O” reference is not consistent.
• ¼” Input and Output Connectors – we kept the 1/4″ phone jacks from the 160X, with the output capable of driving its own additional 600Ω load (single-ended) in addition to any load at the XL output.
• Detector Input -useful for special applications including frequency conscious compression in which an external equalizer is used.
• DC-controlled Parameters -the signal does not pass thru any of the parameter controls. Instead a DC voltage controls all functions which eliminates any possibility of potenti­ometer noise as the controls age.

Specifications:

• Input Characteristics
  • Rear Panel Input Impedance: Balanced = 100kΩ / Unbalanced = SOkΩ
  • Maximum Input Level: +24dBu (12.3Vrms)
  • Rear Panel Connector Type: 1/4″ TRS Phone Jack and XL-type Connector
  • Detector Input Impedance: Balanced = 460kΩ/ Unbalanced = 230kΩ
  • Maximum Detector Input Level: +28dBu (19.SVrms)
  • Detector Connector Type: 1/4″ TRS Phone Jack
• Output Characteristics
  • Output Source Impedance: Balanced, 22Ω, XL / Unbalanced = 44Ω, Phone
  • Minimum Load Impedance: Greater than or equal to 600Ω
  • Maximum Output Level: Balanced and Unbalanced, +24dBu (12.3Vrms) into 600Ω
  • Connector Type: ¼” TR5 Phone Jack and XL-type Connector
• Performance Characteristics
  • Frequency Response: 20Hz-20kHz (+ O.SdB)
  • THO Distortion: <0.2%, Any amount of compression@ lkHz
  • IMO Distortion: <0.2% SMPTE
  • Equivalent Input Noise: -89dBu
  • Dynamic Range: 113dB
  • Output Gain: Variable from -20dB to +20dB
  • Threshold: Compressor -40dBu to +20dBu
  • Threshold Characteriitics: Selectable Over Easy® or Hard Knee
  • Compression Ratio: Variable 1:1 -∞:1 thru to-1:1; >60dB Maximum Compression
  • Attack Time: Program-Dependent; 1Sms for lOdB, Sms for 20dB, 3ms for 30dB
  • Release Time: Program-Dependent; 8ms for ldB, 80ms for lOdB, 400ms for SOdB; 125dB/sec Rate
• Controls, Indicators, Meters
  • Controls: Threshold Knob, Ratio Knob, Output Gain Knob, Over Easy /Hard Knee Switch, Slave Switch, Bypass Switch, Input/Output Switc
  • Indicators: Below: Green; Threshold: Yellow; Above: Red; Slave: Yellow; Bypass: Red; In/Output: Red
  • Metering: 19 Segment LED Bargraph Display indicating Input/Output Level; 13 Segment LED Bar­graph Display indicating Gain Reduction
  • Calibration: Factory preset at OVU = +4d8u (1.23Vrms); rear panel potentiometer sets OVU for any level from -lOdBu (7.8m Vrms) to + lOdBu (2.45Vrms).
  • Stereo Coupling: True Power Summing; l/4″ TR5 Phone Jack
• General
  • Power Line Requirements: 90 – 130VAC, 50/60Hz, Switchable to 220-240VAC
  • Power Consumption: 12W
  • Dimensions: 1.75″ (H) x 19″ (W) x 9 .25″ (D)
  • Rack Space: 1 Rack Unit
  • Weight: 6.Slbs/9lbs shipping weight