Dolby LP8D84X12 Lake LP8D8 4X12 Processor
Dolby LP8D84X12 Lake LP8D8 4X12 Processor
The Dolby® Lake® Processor marks the next generation in digital loudspeaker and equalization technology. With unsurpassed audio quality and the most advanced loudspeaker processing available, it will improve the sound of any system. Effortless control is provided through the Dolby Lake Controller software, or the exclusive front‐panel Portal metering and control interface. The Processor platform offers complete, native‐digital signal processing functionality, with support for up to 4‐in, 12‐out loudspeaker applications and 8 in, 8‐out EQ applications. The signal processing can also be changed to provide an EQ 4×4 configuration together with a loudspeaker 2×6 configuration. The Processor includes several advanced technologies for improving sound quality. These include Raised Cosine Equalization™ (the foundation underlying the Ideal Graphic EQ™ and Lake Mesa EQ™ interfaces), plus linear phase crossovers, LimiterMax™ loudspeaker protection, and Iso‐Float™ ground isolation.
Specifications:
- Audio Performance
- Conversion Resolution: 24-bit
- Internal Sample Rate: 96 kHz
- Internal Data Path; 32-bit floating point
- System Propagation Delay: <2 ms from any input to any output (analog or digital)
- Maximum Available Delay: 2 s from any input to any output
- Sample-Rate Converters
- Operating Sample Rates: 44.1, 48, 88.1, 96 kHz
- Resolution: 24-bit
- THD + Noise: 0.00003% typical, 20 Hz to 20 kHz, unweighted
- Dynamic Range: 140 dB typical, 20 Hz to 20 kHz, unweighted
- Back-Panel Interface
- Analog I/O Connectors: XLR
- AES/EBU I/O Connectors: 25-pin D-connector, with selectable termination on pairs 1 and 2
- S/PDIF I/O Connectors: Toslink™ optical
- Word Clock Input: BNC with selectable termination
- Ethernet: Auto 10/100, Auto Uplink: (2) RJ-45, (1) EtherCon®
- Power: 3-pin IEC, 2 fuses T 1.5A L, 5 × 20 mm
- Digital-to-Analog Outputs
- Frequency Response: +0/–0.1 dB, 3 Hz to 20 kHz
- THD + Noise:
- 0.0004% typical at 1 kHz
- 0.00056% typical, 20 Hz to 20 kHz, unweighted
- Dynamic Range: 113 dB typical, 20 Hz to 20 kHz, unweighted
- Output Impedance:50Ω
- Maximum Output Level: +21 dBu
- Crosstalk: –100 dB, 2 Hz to 40 kHz
- Analog‐to‐Digital Inputs
- Frequency Response: +0/–0.2 dB, 2 Hz to 20 kHz
- THD + Noise: 0.00022% typical at 1 kHz, 0.00033% typical, 20 Hz to 20 kHz, unweighted at +21 dBu headroom setting
- Dynamic Range 116 dB typical, 20 Hz to 20 kHz, unweighted at +21 dBu headroom setting
- Input Impedance: 20 kΩ balanced, 10 kΩ unbalanced
- Maximum Input Level: +26 dBu
- Input Sensitivity Settings for Digital Full-Scale: +10, +16, +21, +26 dBu
- Common Mode Rejection: 65 dB, 20 Hz to 20 kHz, 75 dB typical at 1 kHz, 70 dB typical at 20 kHz
- Crosstalk: –100 dB, 2 Hz to 40 kHz
- Combined A/D and D/A
- THD + Noise: 0.0005% typical at 1 kHz, 0.00063% typical, 20 Hz to 20 kHz, unweighted
- Dynamic Range: 113 dB typical, 20 Hz to 20 kHz, unweighted
- AES/EBU I/O and S/PDIF I/O
- Supported Resolutions: Up to 24-bits
- Supported Sample Rates: 44.1, 48, 88.1, 96 kHz
- Dante
- Supported Resolution: 24-bits
- Supported Sample Rate: 96 kHz
- Number of I/O channels: 8 input and 16 output channels
- Power Requirements: 100–240 VAC ±10%, 120 W maximum
- Dimensions and Weight:
- 2-RU rackmount: 8.74 × 48.26 × 35 cm
- (3.44 × 19 × 13.78 inches); net: 9 kg (20 lbs.)
