DPA 4062 Black Omnidirectional High-Sensitivity Lavalier Mic With LEMO Connector
DPA 4062 Black Omnidirectional High-Sensitivity Lavalier Microphone With LEMO Connector
This microphone is designed for unobtrusive use in miking drums and brass instruments. The mic is acoustically identical to DPA’s 4060 microphone with an adjusted sensitivity for compatibility with transmitters and a higher SPL rating for use on louder sources. It features a neutral sonic character that is designed for accurate reproduction of your source audio with no coloration.
Features:
- Designed for Unobtrusive Use
- Close Mic Applications
- Includes High Boost & Soft Grids
Specifications:
- Polar Pattern: Omnidirectional
- Principle of Operation: Pressure
- Cartridge Type: Pre-polarized condenser element with vertical diaphragm
- Frequency Range:
- Soft-Boost Grid: 20 Hz to 20 kHz +/-2 dB, 3 dB soft boost at 8 to 20 kHz
- High-Boost Grid: 20 Hz to 20 kHz +/-2 dB, 10 dB boost at 12 kHz
- Sensitivity: 1 mV/Pa, -60 dB re. 1 V/Pa (nominal, +/-3 dB at 1 kHz)
- Equivalent Noise Level:
- A-Weighted:
- Typical: 33 dBA re. 20 µPa
- Maximum: 37 dBA
- ITU-R BS.468-4:
- Typical: 45 dB
- Maximum: 49 dB
- A-Weighted:
- S/N Ratio: 61 dBA, 1 kHz at 1 Pa (94 dB SPL)
- Total Harmonic Distortion (THD):
- <1% THD up to 123 dB SPL peak
- <1% THD up to 120 dB SPL RMS sine
- Dynamic Range: Typical 90 dB
- Maximum Sound Pressure Level (SPL): Peak Before Clipping: 154 dB
- Output Impedance: 30 to 40 Ω
- Cable Drive Capability: Up to 984′ (300 m)
- Connector: Hardwired 3-pin Lemo connector
- Temperature Range: -40 to 113°F (-40 to 45°C)
- Relative Humidity: Up to 90%
- Cable Length: 5.9′ (1.8 m)
- Dimensions: 0.21 x 0.50″ (5.40 x 12.70 mm)
- Weight: 0.26 oz (7.5 g)
