ETC Source Four LED Series 2 Lustr Ellipsoidal Light Engine with Shutter Barrel 26-Degree EDLT Lens, White
ETC Source Four LED Series 2 Lustr Ellipsoidal Light Engine with Shutter Barrel 26-Degree EDLT Lens, White
The Source Four LED Series 2 revolutionizes LED lighting. With optimized arrays and finely-tuned electronics, Series 2 offers a combination of light quality and output that cannot be matched. Source Four LED Series 2 Lustr luminaires are based on the x7 Color System, utilizing seven colors including high-output lime to achieve true, usable broad-spectrum color with a depth and feel beyond any RGB fixture. Series 2 light engines work with all Source Four lens tubes to deliver a high-quality, controllable beam of LED light.
Features:
- Up to nine fixtures (15A max) may be linked via power thru connector (10 fixtures total per circuit) when used with R20 Relay Module or Unison Echo Relay Panel.
- Multiple control options, including Direct, RGB, HSIC, and console-free modes
- 15-bit virtual dimming engine for smooth fades and minimal color shift during dimming
- ETL Listed to UL1573; IP20 rated
Specifications:
- Source:
- LED details: 60 Lumileds LUXEON® Rebel LED
- Max lumens: 8,667
- Lumens per watt: 51.9
- L70 rating (hours to 70% output): 54,000 hours
- Color:
- Colors used: Red, Amber, Lime, green, Cyan, Blue, Indigo
- Color temperature range: 2,200–6,500 K
- Calibrated array: Yes
- Red shift: Yes (can be disabled)
- Optical:
- Beam angle range: 26° EDLT
- Gate size: 80 mm
- Aperture size: 6.25–14 in (depending on lens tube)
- Pattern projection: Yes
- Pattern size: A or B
- Camera flicker control/Hz range: Yes (900–25,000 Hz)
- Notes: Can be used with LED CYC and Fresnel adapters
- Control:
- Input method: DMX512 via 5-pin XLR
- Protocols: DMX512/RDM
- RDM configuration: Yes
- UI type: LCD
- Local control: Yes
- Onboard presets: Yes
- Onboard sequences: Yes
- Onboard effects: No
- FixtureLink: Yes
- Notes: 15-bit virtual dimming engine
- Electrical:
- Voltage range: 100–240 VAC 50/60 Hz
- Input method: Neutrik powerCON in and thru, requires power from a non-dimmable source
- Inrush:
- 50 A at 120 V (First half-cycle)
- 107 A at 240 V (First half-cycle)
- Fixtures per circuit:
- 9 Lustr (15 A via power thru connector)
- 10 Lustr (via R20 module or Echo Relay Panel)
- Wattage typical: 167
- Current draw:
- 1.44 A at 120 V
- 0.78 A at 240 V
- Thermal:
- Ambient operating temp: 0°–40°C (32°–104°F)
- Fan (controllable): Yes (yes)
- Droop compensation: Yes
- dB range: 22.5 dBA average at 1 m
- BTUs/hour: 569
- Physical:
- Materials: Die-cast, all metal housing
- Color options: White
- Mounting options: Yoke, cyc floor stand (sold separately)
- IP rating: IP20
- Weight: With barrel: 8.3 kg (18.3 lb)
