JBL LSR305 Powered Studio Monitors with Stands & Isolation Pads
JBL LSR305 Studio Monitors, Stands, Iso Pads, and Cables
The JBL LSR305 is a bi-amplified studio monitor with magnetically-shielded 5″ low frequency transducer and 1″ soft-dome high frequency transducer and image control wave guide. Class-D 41W RMS amplifier for LF, and 41W RMS amplifier for HF. Balanced XLR and 1/4″ TRS inputs with detented level control, HF and LF trim controls. The LSR305 includes a US power cord.
Image Control Waveguide: The image control waveguide was developed for JBL’s new flagship M2 Master Reference Monitor and with the introduction of the JBL 3 series, is now included for the first time in an affordable, compact reference monitor. The patent-pending design of the image control waveguide precisely controls the sound emanating from the speaker in the vertical and horizontal planes ensuring the presentation at the listening position is neutral and accurate.
JBL Transducers: The 3 Series long-throw woofer and its damped woven composite Neodymium tweeter are designed from the ground up to reproduce the powerful transients and micro dynamics of your mix. These drivers deliver impressive deep bass and smooth high frequency response beyond the range of human hearing.
Big Power, Big Sound: 3 Series efficient Class D amplifiers provide abundant power to deliver the output and dynamic headroom needed for the most demanding production styles.
Professional Balanced Inputs: Balanced XLR and 6 mm TRS inputs give you the options you need to connect your 3 Series to any signal source while maintaining professional signal quality.
Selectable Input Sensitivity: The -10 dB/+4 dB sensitivity switch ensures compatibility with a broad range of signal sources, allowing you to connect the 3 Series to high output professional gear without any danger of input overload.
LF Trim and HF Trim “TRIM” Switches: Both the low and high frequencies give you excellent control over the 3 Series sound in “your” room. Use these to fine-tune the amount of bass and treble you hear to compensate for room acoustics, program material and your personal taste.
JBL Professional Reliability: Prior to becoming a production-ready design, each 3 Series model is subjected to JBL’s tough 100 hour power test, in which the speaker is required to play continually at full output for 100 hours without failure. This demanding test ensures your 3 Series speakers will deliver years of reliable performance.
JBL LSR Design: While most manufacturers take only a single on axis measurement of the speaker’s performance, this doesn’t tell how it will sound in your room. JBL’s LSR Linear Spatial Reference design criteria requires seventy-two measurements yielding more than 1,200 times more data, enabling JBL to engineer a speaker that “sounds right” in any working space. With LSR design, 3 Series Studio Monitors deliver superior accuracy regardless of the size and shape of your room, so your mixes “hit their mark” when heard on any playback system.
Deep Pedigree: The impressive performance of the 3 Series Reference Monitors is the result of JBL’s development of it’s flagship M2 Master Reference Monitor.
The Jamstands JSMS70 is a stable low-profile base that can easily be positioned into tight spaces and includes both leveling floor spikes for carpeted areas and rubber feet for hard wood and tile surfaces. The JS-MS70 has four heights from 32.5″ to 44.25″ and can be securely locked into place with the included locking pin.
Ulimate Acoustics UA-ISO-100 studio monitor pads have been designed to help you boost the accuracy of your monitors by providing a simple, affordable way to isolate your monitors from the surfaces you place them on. Using Ultimate Isolators, you will immediately notice enhanced clarity and bass response in your mixing environment. This will help you to prevent those unwanted surprises when you finally take that new mix out to the club or just to your car stereo, because you have a more accurate reference of your signal while mixing.
JBL LSR305 Studio Monitor Features:
- Frequency range: 43 Hz-24 kHz
- Max peak SPL: 108 dB SPL C-weighted
- Max peak input: +23 dBu
- LF driver size: 127 mm (5″)
- HF driver size: 25 mm (1″)
- LF driver power amp: 41W Class D
- HF driver power amp: 41W Class D
- LF trim control: 2 dB, 0, -2 dB
- HF trim control: +2 dB, 0, -2 dB
- Input types: 1 x XLR, 1 x TRS balanced
- AC input voltage: 100-240 VAC +/- 10% 50/60 Hz
- Dimensions: 11.75″ x 7.28″ x 9.88″ / 298mm x 185mm x 251mm (H x W x D)
- Weight: 10.12 lbs. / 4.6 kg
JSMS70 Studio Monitor Stand Pair Features:
- Stable platform with 1mm thick non-slick strips
- Locking pin ensures stable and accurate height positions
- Locking heights include 32.25″, 36.25, 40.25″, 44.25″
- Platform Dimensions: 9″ x 9″
- Low-profile base can be easily positioned into tight spaces
- Leveling floor spikes and rubber feet included
Solena Professional Microphone Cable Features:
- 25′ XLR to XLR
- Touring grade, noiseless microphone cable
- High-quality XLR connectors
- Durable, flexible, abrasion-resistant jacket
- Ideal for use with microphones, audio component cabling, and powered/active loudspeakers
