JBL VLA-C2100-GR 2x 10-Inch Two-Way Horn-Loaded Line Array 100-Degree Loudspeaker System – Gray
JBL VLA-C2100-GR 2x 10-Inch Two-Way Horn-Loaded Line Array 100-Degree Loudspeaker System – Gray
The VLA-C2100 uses JBL proven technology components. The high-frequency section is horn-loaded for maximum sensitivity and optimum pattern control and features three D2415 drivers with 1.5” diameter annular diaphragms, 1.5” voice coils, and neodymium motors.
The low-frequency section utilizes dual 2261 10” Differential Drive® 3” voice coil drivers.
Enclosures feature multi-layer reinforced fiberglass and steel end-panels. Grilles are zinc plated, powder-coated 14-gauge perforated steel with an acoustically transparent black grill cloth backing, a hydrophobic mesh underlayer, and a waterproof rail system.
The rigging system is integral to the design of the system. Inter-box angles are selected when the array is assembled. Other accessories include a rigging frame, pull-back bar, and a cardioid kit for the sub.
Features:
- Compact line array module optimized for permanent install applications
- Advanced technology component transducers for low weight and high output
- Outdoor IP55 rated enclosure for protection from dust and water
- Comprehensive rigging points for creating a line array configuration
- Fiberglass box construction and weatherized components
- Can be bi-amplified for maximum SPL, or fed passively for reduced amplification costs
- 100° horizontal coverage pattern
Specifications:
- Frequency Range (-10dB): 86 Hz – 18 kHz
- Frequency Response (±3 dB): 109 Hz – 15.3 kHz
- Full Range: 800 W Continuous Pink Noise (3200 W peak), 2 hrs / 400 W Continuous Pink Noise (1600W peak), 100 hrs
- Bi-amp LF: 800 W Continuous Pink Noise (3200 W peak), 2 hrs / 400 W Continuous Pink Noise (1600W peak), 100 hrs
- Bi-amp HF: 150 W Continuous Pink Noise (600 W peak), 2 hrs / 50 W Continuous Pink Noise (200 W peak), 100 hrs
- Full-Range: 80 V Rms (2 hrs), 160 V peak
- Maximum SPL (1m): 131 dB Cont. Ave (2 hrs), 137 dB Peak
- Coverage Pattern (-6 dB):
- Horizontal: 100° (+5°/-15°, 1.5 kHz to 15 kHz)
- Vertical: Varies with array size and configuration
- Amplifiers:
- Crown DCi Family with DSP on-board
- Recommended: Crown DCi 2 | 1250N, Crown DCi 4 | 1250N/ND/DA, Crown DCi 2 | 2400N, Crown DCi 4 | 2400N
- LF Driver: 2 x 2261FF, 254 mm (10 in) diameter, each with two 76 mm (3 in) diameter voice coils, Neodymium Differential Drive®, Direct Cooled™
- HF Driver: 3 x 2415K, D2 Dual Diaphragm Dual Voice Coil Compression Drivers, each with two 38 mm (1.5 in) dia. Voice Coils; 21 mm (0.8 in) exit
- Enclosure Material: Fiberglass shell, gelcoat finish, with 18 mm Birch plywood internal bracing
- Grille: Powder coated 14 gauge hex-perforated steel with zinc under-coating, backed with acoustically transparent cloth and hydrophobic screen
- Inter-Enclosure Angles:
- VLA-C2100 to VLA-C2100: 2.4°, 3.8°, 6.0°, 9.5°, 15° (using VLA-C2100 Bracket Plate, included)
- VLA-C2100 to VLA-C265: 1.9°, 3.0° (using VLA-C2100 Bracket Plate) and 4.7°, 7.5°, 11.9° (using VLA-C265 Bracket Plate)
- VLA-C2100 below VLA-C125S Subwoofer: 0°, 7.5° (using VLA-C125S Bracket Plate)
- Environmental: IP-55 rating per IEC529 (dust protected and protected against jets of water)
- Terminals: CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs. Touch-proof covers
- Colors: Gray (similar to Pantone 420C)
- Dimensions (H x W x D): 381 x 848 x 460 mm (15.0 x 33.4 x 18.1 in)
- Net Weight (each): 37.7 kg (83 lbs)
- Shipping Weight (each): 44.0 kg (97 lbs)
- Included Accessories:
- 2 x VLA-C2100 Bracket Plates
- 8 pcs. M10 x 35 mm stainless steel bolts (1.5mm pitch, 6 mm hexdrive)
- 2 pcs. Plastic Trim Cover Panels for Bracket Plates
- 8 total 3-32 x ½” trusshead, phillips-drive, stainless steel bolts
- Optional Accessories: VLA-C-SB2 (JBL-VLACSB2BK) Suspension Bracket Kit
