JEM ZR44HIMASS Water Based Fog Machine
JEM ZR44HIMASS Water Based Fog Machine
The Jem ZR44 Hi-Mass™ is a reliable and highly efficient fogger capable of precise fog delivery from subtle to massive. Ideal for a variety of settings from small venues to huge stadiums and arenas, it features advanced technology for top-quality performance, as well as advances in digital functionality such as RDM compatibility.
Features:
- 3 & 5 pin DMX interface
- Prepared for multifunctional digital remote
- RDM capable
- Floor standing or truss mounting
- Neutrik PowerCon connector
- 1200 m³/min fog output
- Continuous output
- Tough and solid design
- 1800 W heat exchanger
- 7.5 min heat-up time
- Indirect Fluid Sensing System
- Proprietary Pro Steam Simulation fluid solution
- Different fluid options for different applications
- Leaves no oil residue on light fixtures
- Soft Start technology
Specifications:
- Physical:
- Length: 687 mm (27.1 in.)
- Length with optional drip tray: 752 mm (30.0 in.)
- Width: 379 mm (15.0 in.)
- Height: 248 mm (9.8 in.)
- Height with hanging bracket: 353 mm (13.9 in.)
- Weight, dry: 19.0 kg (41.9 lbs.)
- Weight, filled: 28.5 kg (62.9 lb.)
- Performance:
- Coverage volume: 1200 m3 (42,378 ft3) per minute
- Fluid consumption (maximum): 120 ml/minute
- Continuous effect output
- Ready time: 10 minutes
- Control and Programming:
- Control options: Integrated analog remote control, DMX, optional digital remote control, master/client link mode
- Control parameters: Continuous or timer-controlled variable output
- Fog: Variable output control, 0-100%
- DMX channels: 1
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20 RDM
- Construction:
- Color: Black, silver
- Housing: Steel and aluminum
- Fluid reservoir: 9.5 liter drop-in
- Hanging bracket: Integrated yoke with safety attachment point
- Heat exchanger: 1800 W, thermally protected
- Fluid pump: Oscillating piston, high pressure
- Fluid management: Fluid out sensing, sealed for transportation
- External fluid control: Fluid sensing
- Drip tray: Optional, bolt-on tray with reusable collection sponge
- Installation:
- Mounting: Standing or hanging
- Orientation: Up to +/- 45° from horizontal
- Clearance around machine: 100 mm (4 in.)
- Connections:
- AC power: Neutrik PowerCon
- DMX, link mode in/out: 3- and 5-pin locking XLR
- Remote control: 3-pin locking XLR
- Firmware: AVR socket
- Electrical:
- AC power: 100-130 V, 50/60 Hz
- Main fuse: 20 AT (slow blow), 125 V
- Typical power and current: 1890 W, 14.6 A*
- Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
- Thermal:
- Exterior surface temperature, steady state: 50° C (122° F)
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Max. nozzle temperature: 200° C (392° F)
- Minimum ambient temperature (Ta min.): 5° C (41° F)
