Korg ARP Odyssey FS Rev2 Black & Gold Analog Synth
Korg ARP Odyssey FS Rev2 Black & Gold Analog Synth
Assembled in America, and available to the world once again. The long-awaited full-size ARP Odyssey is now available in a limited edition. The revival of the ARP Odyssey originated from a desire to reconstruct a legendary synthesizer of the 1970s, faithfully reproducing its original analog form while combining respect for history with an update for today’s music production environment; it first took shape as the ARP Odyssey, completely analog but in a more compact 86%-sized unit.
Korg’s next move is an even more faithful recreation of the original ARP Odyssey: it’s the full-sized ARP Odyssey FS. With a standard keyboard and a body that emanates a sense of solidity, it delivers great playability and a persuasive stage presence. Just like its original version, the instrument is assembled in the United States, faithfully carrying on the quality, sound, and spirit of the original. Only a small number of each is being produced. Don’t miss your chance to obtain a full-sized ARP Odyssey – an instrument with decades of soul.
Features:
- True analog sound generated by a complete replication of the original ARP Odyssey’s circuitry
- Pitch modulation and pulse width modulation can be controlled
- Pitch is variable over a wide range of 20 Hz–2 kHz.
- Oscillator sync provides sharp, great-sounding overtones extending into a high range
- Noise generator provides two noise types: white and pink
- Powerful LFO can be used as a modulation source for the oscillator or filter, or as a trigger source for sample & hold
- Ring modulator generates metallic sounds with rich overtones
- The three types of low-pass filter found on different production runs of the original ARP Odyssey are all provided
- A wide variety of modulation sources such as S/H, LFO, ADSR, and AR can be used to modulate the filter
- A high-pass filter is provided following the low-pass filter, giving you even broader sound design possibilities
- A new function, the Drive switch generates extreme and aggressive sounds
- Envelope generator with two types: ADSR and AR. This can be used not only for the VCA but also to modulate the filter or oscillator
Specifications:
- Keyboard: 37-note (standard key or full size key, no velocity sensitivity, no aftertouch)
- Maximum polyphony: 2 voices for duophonic; normally monophonic
- Controllers: transpose positions 2 octaves down, normal, 2 octave up
- Noise generator: noise spectrum types (white and pink)
- Portamento:
- Maximum speed about 0.01 msec./oct
- Minimum speed about 1.5 sec./oct
- VCO (voltage controlled oscillator)
- Waveforms: sawtooth, square, pulse (dynamic pluse)
- Frequency range: VCO-1 in low freq. mode, 0.2 Hz – 20 Hz: VCO-1 and VCO-2 (audio range) about 20 Hz – 20 kHz
- Warm up drift: 1/30 semitone from turn on max
- Pulse width: 50% – 5%
- Pulse width modulation: ADSR, +45% / LFO, +15%
- Voltage controlled response: 1 V/oct
- VCF (Voltage Controlled Filter)
- Types: low pass (I: 12 dB/oct., II III: 24 dB/oct.)
- Frequency range: 16 Hz – 16 kHz
- Maximum usable Q: 30
- Resonance: 1/2 – self oscillate
- Voltage controlled response: C3 key (left edge): 0 V / C6 key (right edge) 3 V
- VCA (Voltage Controlled Amplifier)
- Dynamic range: 80 dB
- Ring modulator
- Type: digital
- Input signal: VCO-1, VCO-2 (square wave)
- Sample & hold
- Command sources: keyboard or LFO
- Sampled signals: VCO-1 sawtooth wave and square wave, VCO-2 square wave and pink noise
- ADSR envelope generator
- Attack time: 5 msec. – 5 sec.
- Decay time: 10 msec. – 8 sec.
- Sustain level: 0 – 100 % or peak
- Release time: 15 msec. – 10 sec.
- AR envelope generator
- Attack time: 5 msec. – 5 sec.
- Release time: 10 msec. – 8 sec.
- Control input jacks
- Pedal: 6.3 mm monaural phone jack
- Portamento footswitch: 6.3 mm monaural phone jack
- Audio output jacks (low)
- Connector: 6.3 mm monaural phone jack
- Maximum output level: -20 dBu@ 10 k ohm load
- Output impedance: 10k ohms
- Audio output jacks (high)
- Connector: XLR connector
- Maximum output level: +4 dBu@ 1 k ohm load
- Output impedance: 330 ohms
- Headphones jack
- Connector: 6.3 mm stereo phone jack
- Maximum output level: 50 mW + 50 mW@ 33 ohm load
- Output impedance: 10 ohms
- External audio input (ext audio input) jack
- Connector: 6.3 mm monaural phone jack
- Maximum input level: -10 dBu
- Input impedance: 22 k ohms
- MIDI connector: in
- USB connector: type B
- CV in/out jacks
- Keyboard CV (in/out): 1V/oct.
- Connector: 3.5 mm monaural phone jack
- Gate in/out jacks
- Gate in: +3V (minimum)
- Gate out: +10V, key down; 0 V all keys up
- Connector: 3.5 mm monaural phone jack
- Trig in/out jacks
- Trig in: +3V pulse min., 10 ?sec. duration minimum
- Trig out: +10V pulse on key depression, 10 ?sec. duration
- Connector: 3.5 mm monaural phone jack
- Power supply: AC adapter (DC 12V) + power cable
- Power consumption: 7.1W
- Dimensions: 23.03″ x 18.35″ x 6.42″ / 585mm x 466mm x 163 mm (WxDxH)
- Weight: 16.09 lbs. / 7.3 kg
- Included items: AC adapter (DC 12V), power cable, phone cable, mini-phone cable
