Mackie C300 12-Inch 2-Way Passive Speaker
Mackie C300 12-Inch 2-Way Passive Speaker
C-Series loudspeakers are an excellent choice just about anywhere you can place them. Build the dream PA for your band with a pair of C-Series speakers and a PPM Series Powered Mixer or integrate them into an existing system. Add on a few more and an FRS Series amplifier for an impressive floor monitor setup. Since they are fully flyable, the C-Series is perfect for install systems like a small sanctuary, youth room, bars and small clubs.
Features:
- 2-way portable Precision Passive loudspeaker system
- 750W / 300W RMS peak power handling at 8?
- 12″ long-throw low-frequency transducer with 3″ voice coil
- High-output 1.75″ titanium compression driver
- Ultra-wide, smooth dispersion via multi-cell horn aperture and constant directivity horn
- Integrated Low Impedance Compensated Crossover (LICC) with full driver protection
- Lightweight for ultimate portability (46 lb / 20.9 kg)
- Asymmetrical trapezoidal cabinet for floor monitor positioning
- Stand / Pole-mountable
- Flyable via ten M10 rigging points using the optional eyebolt kit
Specifications:
- Frequency Response (- 3dB): 55 Hz – 18 kHz
- Frequency Range (-10 dB): 45 Hz – 20 kHz
- Max SPL long-term: 123 dB @ 1 m
- Low-Frequency Crossover Type: 24 dB / octave, time offset corrected
- High-Frequency Crossover type: 24 dB / octave
- Crossover Point: 1800 Hz
- Input / Thru Connector Type:
- Speakon-Style NL-4 jack
- 1/4″ TS jack
- Input Impedance: 8 ?
- Power Handling:
- RMS: 300 watts
- Music: 500 watts
- Peak: 750 watts
- Diameter: 23 in / 300 mm
- Voice Coil Diameter: 3 in / 75 mm
- Magnet Material: Ferrite
- Diaphragm Diameter: 1.75 in / 44.5 mm
- Diaphragm Material: Heat treated titanium
- Horn Exit Diameter: 1 in / 24.5 mm
- Type: Conical and Exponential
- Mouth Size: 12 in / 305 mm (W) x 7 in / 178 mm (H)
- Horizontal Coverage: 90° (1 kHz – 20 kHz)
- Vertical Coverage: 45° (2.8 kHz – 20 kHz)
- Over-Excursion Protection: Second-order high-pass filter
- Driver Protection: Dynamic protection for compression driver
- Basic Design: Asymmetrical Trapezoidal
- Material: Polypropylene
- Finish: Black, textured finish
- Handles: Once on each side, one on top
- Grille: Perforated metak with weather-resistant coating
- Operating Temperature Range:
- -10°C to 45°C
- 14°F to 113°F
- Height: 26.5 in / 673 mm
- Width: 16.8 in / 427 mm
- Depth: 15.5 in / 394 mm
- Shipping Weight: 52.0 lb / 23.6kg
- Height: 26.1 in / 663 mm
- Width: 16.0 in / 406 mm
- Depth: 14.8 / 376 mm
- Net Weight: 46.0 lb / 20.9 kg
- Floor mount, pole mount, or fly via 10 integrated M10 threaded inserts (two each located on each side, top, bottom and rear of enclosure)
- PA-A1 forged shoulder eyebolt kit (4 x M10 X 1.5 mm x 20 mm) P/N 0031943
- SPM200 Loudspeaker Pole Mount: P/N 2035170-01
- C300z Passive, 2-way Loudspeaker: P/N 2033793
- C300z Passive, 2-way Loudspeaker, CN: P/N 2033793-05
Acoustic Performance
Audio
Low-Frequency Transducer
High-Frequency Transducer
Horn Design
Safety Features
Construction Features:
Physical Properties (packaged product)
Physical Properties(product)
Mounting Methods
Options
Ordering Information
