Martin RUSH MH 5 Profile 75-Watt LED Moving Head Light
Martin RUSH MH 5 Profile 75-Watt LED Moving Head Light
This compact and bright LED profile moving head with efficient optics punches out a variety of effects and colors. With two color wheels, two gobo wheels and rotating prism the MH 5 Profile offers full effect in a super compact housing, making it perfect for DJs, bands, clubs, bars, cruise ships and installations where small footprint and low weight is critical.
Features:
- Compact 75W LED moving head profile
- One rotating and one fixed gobo wheel
- Two-color wheels
- 3-facet prism
- Super bright – efficient optics
- Electronic dimming and strobe
Specifications:
Physical
- Length: 290 mm
- Width: 187 mm
- Height: 422 mm
- Weight: 9 kg (19.9 lbs.)
Dynamic Effects
- Color wheel 1: 8 colors plus open, rotation with variable direction and speed
- Color wheel 2: 8 colors (incl. 1 x UV, 2 x CTC) plus open, rotation with variable direction and speed
- Rotating gobo wheel: 6 gobos plus open, wheel rotation and gobo rotation
- Static gobo wheel: 7 gobos plus open, wheel rotation and shake
- Electronic ‘shutter’ effect: Strobe effect, pulse effects, instant open and blackout
- Prism: Indexing and rotation with variable direction and speed
- Focus: Motorized
- Electronic dimming: 0 – 100%, four dimming curve options
- Pan: 540°
- Tilt: 270°
- Pan and tilt speed: Adjustable via onboard control panel and DMX
Control and Programming
- Control options: DMX, stand-alone
- DMX channels: 16
- Stand-alone trigger options: Music trig, auto trig
- Stand-alone sequences: 4 pre-programmed shows
- Music trig sensitivity: Adjustable
- Setting and addressing: Control panel with backlit LCD display
- Protocol: USITT DMX512/1990
Optics
- Light source: 75 W LED engine
- Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
- *Figure obtained under manufacturer´s test conditions
Construction
- Color: Black
- Housing: High-impact flame-retardant thermoplastic
- Protection rating: IP20
Installation
- Mounting: One quarter-turn bracket for rigging clamp
- Location: Indoor use only, must be fastened to surface or structure
- Orientation: Any
Connections
- AC power in/thru: Neutrik PowerCon
- DMX data in/out: 3-pin and 5-pin locking XLR
Electrical
- AC power: 100-240 V nominal, 50/60 Hz
- Typical total power consumption: 165 W
- Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current
- 100 V, 60 Hz: 1.7 A, 165 W
- 230 V, 50 Hz: 0.8 A, 157 W
- Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal
- Cooling: Forced air (temperature-regulated, low noise)
- Maximum ambient temperature (Ta max.): 40° C
- Minimum ambient temperature (Ta min.): 0° C
- Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 565 BTU/hr.
Approvals
- EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
- EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
- US safety: UL 1573
- US EMC: FCC Part 15 Class A
- Canadian safety: CSA C22.2 No. 166
- Canadian EMC: ICES-003 Class A
- Australia/NZ: C-TICK N4241
Included Items
- Power cable, 1.5 m, without mains plug
