Martin RUSH MH 6 Wash RGBW LED Moving Head Light
Martin Rush MH 6 Wash RGBW LED Moving Head Light
The Rush MH 6 Wash is an exciting adaption of the hugely popular Rush Par 2 RGBW Zoom, using the same LED engine and zoom system, but additionally featuring moving head capability. The Rush MH 6 Wash offers a fully pre-mixed color system from 12 x 10 W RGBW LEDs with a spectacular 10?ñ60? zoom. It also offers full electronic dimming, strobe effects and temperature-controlled fan cooling for quiet operation.
Bright LED moving head wash light
12 x 10 W RGBW LEDs
Single-lens wash with fully premixed color
Features:
- 12 x 10 W Osram Ostar RGBW LEDs
- Single-lens wash with fully premixed color
- 2,000 lumen output
- 10?-60? zoom
- 32 pre-built color macros
- Temperature-controlled cooling system
- Digital display menu
- PowerCON in and through
- 3 and 5-pin DMX options
Specifications:
- Physical
- Length: 290 mm (11.4 in.)
- Width: 189 mm (7.4 in.)
- Height: 360 mm (14.2 in.)
- Weight: 7.1 kg (15.7 lbs.)
- Dynamic Effects
- Color mixing: RGBW
- Color presets: 36 color presets plus full white, ëcolor wheelí effects
- Electronic dimming: 0 – 100%, four dimming curve options
- Strobe and pulse effects: Variable speed and action, random strobe
- Electronic ‘shutter’ effect: Instant open and blackout
- Zoom: Motorized
- Pan: 540?
- Tilt: 200?
- Control and Programming
- Control options: DMX
- DMX channels: 14
- White balance control: RGB adjustment
- 16-bit fine control: Dimming, pan and tilt
- DMX address setting: Control panel with LCD display
- DMX compliance: USITT DMX512/1990
- Optics
- Light source: 12 x 10 W RGBW Osram Ostar LEDs
- Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
- Zoom range: 10? – 60?
- Construction
- Color: Black
- Housing: High-impact flame-retardant thermoplastic
- Ingress protection rating: IP20
- Installation
- Mounting points: One quarter-turn bracket for rigging clamp
- Location: Indoor use only, must be fastened to surface or structure
- Orientation: Any
- Minimum distance to illuminated surfaces: 200 mm (8 in.)
- Minimum distance to combustible materials: 100 mm (4 in.)
- Minimum clearance around fans and vents: 100 mm (4 in.)
- Connections
- AC power in/thru: Neutrik PowerCon
- DMX data in/thru: 3-pin and 5-pin locking XLR
- AC power: 100-240 V nominal, 50/60 Hz
- Power supply unit: Auto-ranging electronic switch mode
- Fuse: T 3.15 A
- Recommended Miniature Circuit Breaker*: Type D
- Typical Power and Current
- 120 V, 60 Hz: 1.3 A, 150 W, PF 0.99
- 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94
- Thermal
- Cooling: Forced air (temperature-regulated, low noise)
- Maximum ambient temperature (Ta max.): 40? C (104? F)
- Minimum ambient temperature (Ta min.): 0? C (32? F)
- Approvals
- EU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493
- EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
- US safety: UL 1573, UL 8750
- US EMC: CFR Title 47 Part 15
- Canadian safety: CSA C22.2 No. 166
- Australia/NZ: C-TICK N4241 / RCM
- Included Items
- Power input cable, 6 A, 18 AWG, UL, 0.75 mm2, H05VV-F, 1.5 m (4.9 ft.), without mains plug
- Omega bracket for rigging clamp attachment
*Figure obtained under manufacturer’s test conditions
Electrical
*Per IEC 60898/UL489/CSA C22.2 No. 5Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical half-cycle RMS inrush current at 240 VAC: 11.3 AMeasurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
