Martin RUSH MH1 Profile Plus 180-Watt LED Moving Light
Martin RUSH MH1 Profile Plus 180w LED Moving Light
This super bright LED profile moving head is even brighter than its predecessor RUSH MH 1 Profile with 50% more output. Efficient optics with an increased beam angle from 13 degrees to 16 degrees punches out a variety of effects and colors from two gobo wheels and two color wheels. For added versatility and effect, it also houses an electronic dimmer and strobe, iris and 3-facet prism and an improved cooling system for quieter operation.
Features:
- 50% increase in lumen output
- 16 degree beam angle
- LED profile moving head
- Super bright – efficient optics
- Rotating gobo wheel
- Fixed gobo wheel
- 2 x color wheels
- Electronic dimming and strobe
- Iris and 3-facet prism
- 3 and 5 pin XLR
- Regulated fan control for quiet operation
Specifications:
Dynamic Effects
- Color wheel 1: 7 colors plus open, rotation with variable direction and speed
- Color wheel 2: 7 colors (incl. 1 x UV, 2 x CTC) plus open, rotation with variable direction and speed
- Rotating gobo wheel: 7 gobos plus open, wheel rotation, gobo indexing, rotation and shake
- Static gobo wheel: 8 gobos plus open, wheel rotation and shake
- Electronic ‘shutter’ effect: Strobe effect, pulse effects, instant open and blackout
- Prism: Indexing and rotation with variable direction and speed
- Iris: Motorized
- Focus: Motorized
- Electronic dimming: 0 – 100%, four dimming curve options
- Pan: 540°
- Tilt: 270°
- Pan and tilt speed: Adjustable via onboard control panel and DMX
Control and Programming
- Control options: DMX, standalone
- DMX channels: 17
- Standalone trigger options: Music trig, auto trig
- Standalone sequences: 4 pre-programmed shows
- Standalone memory: 20 scenes
- Music trig sensitivity: Adjustable
- Setting and addressing: Control panel with backlit graphic display
- DMX compliance: USITT DMX512/1990
Optics
- Light source: 180 W LED engine
- Minimum LED lifetime: 20 000 hours (to >70% luminous output)*
- *Figure obtained under manufacturer´s test conditions
Photometric Data
- Efficacy: 25.5 lumens per watt
- Cut-off angle: 16°
- Total output: 7100 lm
Construction
- Color: Black
- Housing: High-impact flame-retardant thermoplastic
- Protection rating: IP20
Gobos
- Gobo diameter: 26.8 mm +/- 0.2 mm (1.1 in. +/- 0.008 in.)
- Max. image diameter: 22.0 mm (0.87 in.)
- Gobo thickness: 0.3 – 3.5 mm (0.01 – 0.14 in.)
- Gobo material: Steel, aluminum or borosilicate glass
Installation
- Mounting points: Two quarter-turn brackets for rigging clamps
- Location: Dry location only, must be fastened to surface or structure
- Orientation: Any
Connections
- AC power in/thru: Neutrik PowerCon
- DMX data in/out: 3-pin and 5-pin locking XLR
Electrical
- AC power: 100-240 V nominal, 50/60 Hz
- Typical total power consumption: 300 W
- Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Thermal
- Cooling: Forced air, temperature controlled
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): 0° C (32° F)
- Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 1010 BTU/hr.
Physical
- Length: 418 mm (16.5 in.)
- Width: 328 mm (13.0 in.)
- Height: 588 mm (23.2 in.)
- Weight: 18 kg (39.7 lbs.)
