Martin THRILL Slimpar Mini Wash Light 4-Pack with DMX Controller
Martin THRILL Slimpar Mini 4-Pack with DMX Controller
Martin THRILL Slimpar Mini 7×3-Watt RGB LED Wash Light
THRILL SlimPAR Mini LED, packs a wallop of light for its small size. This LED fixture will illuminate your party or event with full, intense and saturated colors. Seven 3-watt RGB LEDs give a uniform field of light that is perfect for wall washes, truss toning and front or back lighting. The sit-flat design makes the light easy to slide under tables, tuck inside a truss or into any tight spot.
The THRILL SlimPAR Mini LED features 36 vibrant, pre-programmed colors and RGB color mixing so that any color in the spectrum can be created. Combine this wide color palette with electronic strobe/dimming and the THRILL SlimPAR Mini LED will take your event from great to brilliant. An included wireless remote control makes programming a breeze, simply point and click to get the color you want or run the pre-programmed settings.
Its lightweight design, super-slim profile and wireless remote control make it the perfect fit and a safe all-around choice for on-the-go entertainers, DJs, venues and home enthusiasts that require professional lighting at an affordable price.
THRILL SlimPAR Mini LED is a perfect fit for musicians, DJs, event specialists and home enthusiasts who want to spend their time focused on entertaining, rather than setting up and controlling complex equipment. For a literal plug and play experience, THRILL SlimPAR Mini LED features a built-in microphone—simply turn on the sound trigger and let the beat of your music THRILL your audience. In addition, the fixture has four professionally programmed, preset shows that can be run with no lighting experience required.
Its portable and lightweight design, and included remote makes the THRILL SlimPAR Mini LED ideal for on-the-go entertainers and small venues working with limited stage footprints. It’s also perfect for rental companies who want to supply lighting solutions for smaller setups that do not have the budget for professional lighting operators.
Featuring a sit-flat design, the THRILL SlimPAR mini LED can sit perfectly flat on the ground with its cabling directed to the sides. This gives you the freedom to fit the fixture into tighter spaces, such as underneath tables or for uplighting purposes to illuminate structures at 90 degrees with little hassle.
With the THRILL SlimPAR Mini LED, setup has never been easier. Layout up to 32 fixtures in a master/slave configuration and quickly daisy chain their power and data connections together. For added flexibility, SlimPAR Mini LED can be used as either a hanging fixture or a floor-standing light via the included multi-function hanging bracket.
Control is easy too. The included IR remote control gives you the freedom to simply assign colors to the fixture or you can run the automated lightshows mentioned above. The fixtures can also be used as part of a complete DMX system with an integrated controller such as a Martin M-Touch and free M-PC control software. It’s easy to add washes of light to your live experience with the THRILL SlimPAR Mini LED.
Features:
- Uniform field of light via 7 x 3 W RGB LEDs
- Fixed 25° beam angle
- 36 vibrant pre-programmed colors
- Dynamic effects include color mixing, strobe, dimmer
- Remote control included for quick color selection
- Easy to operate standalone sound-activated, master/slave control methods
- 4 professionally pre-programmed shows
- DMX operable for individualized control and design
- Included multi-function bracket for hanging or surface mount
- Common IEC mains inlet/thru – mains cable included
Specifications:
- Light source: 7 x 3 W RGB LEDs
- Minimum LED lifetime: 30 000 hours (to >70% luminous output)
- Beam angle: 25°
- Color mixing: RGB Color selection: 36 color presets
- Electronic dimming: 0 – 100 %
- Strobe and pulse effects: Variable speed and action, random strobe
- Electronic ‘shutter’ effect: Instant open and blackout
- Control options: DMX, stand-alone, IR remote control DMX channels: 3/6 Stand-alone trigger options: Sound-trigger, auto-run User interface: Control panel with LED display DMX compliance: ANSI E1.11 – USITT DMX512-A
- Housing: High-impact flame-retardant thermoplastic
- Protection rating: IP20
- Mounting: Adjustable bracket, surface or truss mount
- Mounting points: Bracket for single rigging clamp, M12 or ½”
- Orientation: Any
- Location: Indoor use only
- AC power in/thru: IEC male inlet/female connector, C14/C13
- DMX data in/thru: 3-pin XLR
- AC power: 100-240 V nominal, 50/60 Hz
- Fuse: F 3AL, 250V
- Typical total power consumption: 25 W
- Maximum fixtures on AC power throughput, 100-130 V: 10 THRILL SlimPAR Mini LED or 3 A
- Maximum fixtures on AC power throughput, 220-240 V: 15 THRILL SlimPAR Mini LED or 3 A
- Power consumption figures are typical, not maximum. Allow for +/-10% variation.
- Typical Power and Current: 110 V, 60 Hz: 0.3 A, 30 W * 230 V, 50 Hz: 0.2 A, 30 W (Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.)
- Cooling: Passive
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): 0° C (32° F)
- Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 85 BTU/hr.
- Approvals: EU safety: EN 60598-1, EN 60598-2, EN 62031, EN 62471, EN 62493 EU EMC: EN 55015, EN 61000-3-2, EN 61000-3-3, EN 61547
- What’s included: power cable, EU, IEC C13 female, molded Schuko, 1.5 m (6.3 ft.) Power cable, US, IEC C13 female, molded NEMA 5-15P, 1.5 m (6.3 ft.) Multi-function bracket IR remote control: P/N TBA
- Dimensions: Length: 229 mm (9 in.) Width: 115 mm (4.5 in.) Height: 229 mm (9 in.)
- Maximum footprint standing: 229 mm (9 in.) x 204 mm (8 in.)
- Weight: 1.3 kg (2.9 lb.)
Martin M-Touch 512 Channel DMX Lighting Controller
Martin M-Touch is a powerful yet simple control surface for the Martin M-Series controllers, the most affordable professional lighting solutions on the market. Fully compatible with all M-Series consoles and M-PC software, Martin M-Touch is a plug-and-play solution with an innovative control surface like no other lighting console.
14 FSR faders allow control of playbacks and fixture parameters while 20 velocity-controlled pads allow for new types of effects. Additional programming buttons such as Record, Edit, Update, Load and Clear are accessible directly from the M-Touch control panel. Martin M-Touch comes with one DMX 512 Universe for direct control of any compatible DMX device.
Features:
- Truly affordable console surface for both smaller applications and professional use
- Rugged aluminum design for durability
- The most powerful controller of its class with a full 512 DMX channels, expandable to 65,000 channels
Specifications:
- Bank Navigation Up/Down with numerical display
- Main Go section: Snap, Release, Pause and Go buttons
- Command Buttons: Record, Edit, Update, Load, Clear
- Multifunction Mode Select button
- Fixture Selection buttons: Last, Next, Highlight
- 4 x Parameter Select buttons
- 4 x Parameter Adjust touch faders
- 10 x Function velocity pads
- 10 x Playback touch faders with 3 buttons
- (2 x touch pad, 1 x velocity pad)
- Unlocks 1 x DMX universe when connected to M-PC
- Housing: Aluminum, steel, plastic
- Mounting: VESA 75×75, 100×100
- Security: K-Lock locking slot
- IP Rating: IP20
- DMX data link: 1 x 5-pin locking XLR
