Matrox HDX Dual Channel H.264 Encoder for Broadcast
Matrox HDX Dual Channel H.264 Encoder for Broadcast
The Matrox Monarch HDX is a simple and versatile video encoding appliance specifically designed for broadcasters and webcasters who need a flexible solution that is powerful enough to take on today’s demanding webcasting and recording workflows. Monarch HDX offers 3G-SDI and HDMI inputs with frame-synchronization to correct any discontinuity at the input, and two independent H.264 encoders that can be assigned to individual tasks. Webcasting to YouTube and Facebook Live is easy for these popular platforms. All that’s needed is to setup the device once with these accounts and it’s automatically retained for subsequent streams.
Features:
- H.264 Encoding Engine
- Dual-Channel Streaming
- Dual-Channel Recording
- Simultaneous Streaming and Recording
- HDMI and SDI Inputs
- Wowza and Flash Support
- Remote Control
- H.264 Preview Stream
- Profiles and Presets
- Matrox Utils Application
- Closed Captioning Support
Specifications:
- HDMI Video Input:
- 1920 x 1080p 60/59.94/50/30/29.97/25/24/23.98
- 1920 x 1080i 29.97/25
- 1280 x 720p 60/59.94/50
- HDMI Video Output:
- Preview output of video input signal
- 2-frame delay from input to output
- SD video output as windowed in an HD output
- SDI Video Input:
- 1920 x 1080p 60/59.94/50/30/29.97/25/24/23.98
- 1920 x 1080PsF 29.97/25
- 1920 x 1080i 29.97/25
- 1280 x 720p 60/59.94/50
- 720 x 576i 25
- 720 x 486i 29.97
- SDI Video Output:
- Clean distribution of SDI incoming signal
- 0-frame latency passthrough of Input signal
- Hardware bypass relay present in SDI signal path is “closed” on power failure
- Audio Input:
- Processes first two channels of audio embedded in HDMI or SDI input signals
- Unbalanced analog stereo input via 1/8″ jack (3.5 mm)
- Line level
- Audio Output:
- Pass-through of 8 embedded audio channels in HDMI and SDI signals
- Unbalanced analog stereo output via 1/8″ jack (3.5 mm), pass-through of input Line level
- Frame Synchronization: On both HDMI and SDI inputs.
- Video Encoder: Built-in H.264/MPEG-4 Part 10 (AVC)
- Resolutions: Selectable encoding resolutions(128 x 128 to 1920 x 1080)
- Video Bit Rates:
- Single Encoder:
- Streaming mode – 20 Mbps
- Recording mode – 30 Mbps
- Dual Encoder:
- Maximum 10 Mbps for streaming channels
- Maximum 30 Mbps combining both channels
- Single Encoder:
- Encode Frame Rates: Encode frame rates (fps)(60/50, 30/25/24, 15/12.5)
- Encoding Profiles: Baseline, Main, and High
- Encoding Controls:
- 2.0, 3.0, 3.1, 4.0, 4.1 level support
- IBP GOP size and structure
- Variable bit rate support
- Average min/max data rate controls
- De-blocking filter
- Audio Encoder: MPEG-4 AAC
- Audio Encoding: Standard(AAC-LC)
- Sample Frequency: 32, 44.1, or 48 kHz when digitized from analog source
- Channels: 2 channels stereo (L/R)
- Audio Bit Rates: Range from 32 kbps to 256 kbps
- Scaler:
- High quality multi-tap 10-bit scaler and de-interlacer
- Available to both streaming and recording operations
- Preview:
- Stream format: H.264
- Bitrate: 300 kbps (average)
- Stream type: RTSP
- Recording Formats: MP4 and MOV with two channels of embedded AAC audio (maximum file length of 300 minutes)
- Network Interface: RJ45 connector providing 10/100/1000 Base-T Ethernet with Static or DHCP addressing
- Protocols:
- RTMP, RTSP/RTP
- IPv4 support
- Unicast and Multi Unicast (from 3 to 10 clients)
- User Interface:
- HTTP via standard PC or Mac web browser using Monarch HDX Command Center
- Front panel push buttons for independent streaming and recording Start/Stop control
- Recording Media Support:
- 2x USB 2.0:
- Support for NTFS file system
- Monarch HD will support writing to USB 3.0 devices at USB 2.0 speeds
- 1x SD card slot:
- Supports SD and SDHC cards
- Supports SDXC cards formatted with NTFS
- Network mapped drive: Support for writing to Shared Folders in computers found on a network using NFS or Windows share protocols
- 2x USB 2.0:
- Transport and Storage:
- Max operating altitude: 9,842 ft / 3,000 m
- Max transport altitude: 39,370 ft / 12,000 m
- Operating humidity: 20 to 80% relative humidity (non-condensing)
- Storage humidity: 5 to 95% relative humidity (non-condensing)
- Regulatory:
- EMI: FCC Class A, CE Mark Class A, ACMA C-Tick Mark, VCCI
- Power Supply Safety: UL/CUL(UL60950-1), TUV-GS(EN60950-1), T-LICENSE(BS EN60950-1), CCC(GB4943.1-2011), PSE(J60950), SAA(AS/NZS60950-1), KC-MARK(K60950),S-MARK(IEC60950-1)
- RoHS Directive 2002/95/EC
- Power:
- Line voltage: 100-240 VAC, 0.5 A
- Frequency: 50-60 Hz
- Input: external AC/DC adapter — IEC320-C8
- Output: 9 to 24 VDC
- Total power consumption: 20 to 30 W typical, 42 W max
- DIN4 locking power connector
- Operating Temperature: 32 to 104°F / 0 to 40°C
- Dimensions:
- 5.6 x 8.5 x 1.4″ / 14.2 x 21.6 x 3.6 cm
- 6 x 8.5 x 1.5″ / 15.3 x 21.6 x 3.8 cm (including pads and BNC spigots)
