Meyer Sound MSL-2A Loudspeaker Online now

Meyer Sound MSL-2A Loudspeaker

Meyer Sound MSL-2A Loudspeaker

The Meyer Sound MSL-2A is a high-powered, wide coverage loudspeaker for professional sound reinforcement applications. Specifically designed for touring reinforcement, the accurate, rugged MSL-2A is a bi-amplified system consisting of a proprietary 15-inch low-frequency driver in a vented enclosure, and a 70-degree high-frequency horn with a 2-inch (throat diameter) driver. The MSL-2A’s drivers provide exceptional efficiency and power handling, with low distortion for maximum clarity. The sturdy, multi-ply hardwood enclosure with textured finish is designed to withstand road abuse. The MSL-2A comes with handles and, optionally, aircraft-style rigging pan fittings or nut plates. The MSL-2A requires a high-quality professional stereo power amplifier capable of delivering up to 600 watts per channel continuously into 8 ohms, with a signal voltage gain of 10 dB (minimum) to 32dB (maximum).

Specifications:

• Acoustical – MSL-2A/S-1 System
  • Frequency Response¹: 40 Hz to 18 kHz +4 dB
  • Maximum SPL²:
    • Continuous: 130 dB
    • Peak: 139 dB
    • Maximum Peak (Music Signal): 144 dB
  • HF Coverage, -6dB points: 70° horizontal x 60° vertical
  • Acoustical Crossover Frequency: 900 Hz
• MSL-2A Loudspeaker
• Transducers:
  • Low Frequency: MS-15 15-inch cone driver, 8 ohms
  • High Frequency: MS-2001A 2-inch throat compression driver, 8 ohms
• High-Frequency Horn: 70 degree modified radial
• HF Network: DC blocking capacitor
• Enclosure: 2.3 cu. ft. vented, multi-ply Finnish birch plywood
• Finish: Black textured
• Protective Grill: Hex perforated metal, powder coated, charcoal grey foam covering
• Connector: EP-4 male
• Rigging (optional): Aircraft pan fittings, 3⁄8″-16 or M10 x 1.5 nut plates
• Physical Dimensions: 21 1⁄4″ W x 24 1⁄4″ H x 18 1⁄4″ D
• Weight: 82 lbs. (37 kg)

S-1 Control Electronics Unit (Sold Separately)

• Input Type³: Active balanced ISO™ input, 10k ohms, 5k ohms per leg
• Output Type: Active push-pull, will drive 600 ohms
• Maximum Input/Output Level:
  • Balanced: +26 dBu
  • Unbalanced: +20 dBu
• Hum and Noise⁴: <-90 dBV
• Dynamic Range: 108 dB
• Sense Inputs: 100k ohms true differential
• Low-Frequency Delay Type: Active all-pass
• Driver Protection Circuitry:
  • Low Frequency: RMS limiter and excursion limiter
  • High Frequency: RMS limiter and excursion limiter
  • VHF Peak limiter
• Indicators:
  • Sense/Gain Detect, Hi and Lo: Red /Green LEDs
  • Limit, Hi, Lo, and VHF: Red LEDs
  • Safe: Green LED
  • Power Supply: Green LED
• Controls:
  • Front Panel: Input attenuator, AC power switch
  • Preset Panel: Lo Cut switch, Safe switch, VHF switch, VHF control
• Connectors:
  • Balanced Inputs/Outputs: 3-pin XLR (A-3)
  • Sense Inputs: Banana jacks
• Power: 90-125/180-250V AC, 50/60 Hz (rear-panel switchable)
• Physical Dimensions: 19″ W x 13⁄4″ H x 73⁄4″ D standard rack mount
• Weight: 8 lbs. (3.6 kg)