Meyer Sound MSL-3A Loudspeaker
Meyer Sound MSL-3A Loudspeaker
Designed to perform in a wide range of large-scale sound reinforcement applications, the high-power, arrayable MSL-3A allows for coherent, controlled coverage of wide areas in theater, club and concert sound reinforcement. The efficient loudspeaker delivers high sound pressure levels with extremely low distortion, for maximum intelligibility and fidelity. The biamplified loudspeaker consists of two proprietary 12-inch low-frequency cone drivers in a unique horn-loaded, vented enclosure, and a single high frequency driver with a 70-degree horn. The rugged, multiple-ply hardwood cabinet is fitted with handles. The MSL-3A requires a high-quality professional stereo power amplifier capable of delivering up to 400 watts/channel continuously into 4 ohms, with a signal voltage gain of 10 dB (minimum) to 30 dB (maximum).
Features:
- High power
- High clarity and coherence
- Arrayable
- Rugged
- Long-term reliability
Specifications:
- Acoustical – MSL-3A/M-3A System
- Frequency response: 75-18k Hz ±4 dB
- Maximum SPL:
- Continuous: 130 dB
- Peak: 135 dB
- HF Coverage:
- Horizontal: 70 degrees
- Vertical: 60 degrees
- Acoustical Crossover Frequency: 800 Hz
- MSL-3A Loudspeaker
- Transducers:
- Low Frequency: (2) MS-12 12-inch cone drivers, 8 ohms per driver
- High Frequency: MS-2001A 2-inch throat (4″ diaphragm) driver, 12 ohms
- High-Frequency: Horn 70-degree modified radial
- HF DC Protection: 20 µF Polypropylene capacitor
- Enclosure: Vented, horn loaded, multi-ply Finnish birch
- Finish: Black textured, charcoal-grey carpet (optional) or black weather protected (optional)
- Physical Dimensions: 21 1⁄4″ W x 56 3⁄4″ H x 30″ D
- Weight: 241 lbs. (109.3 kg)
- Protective Grill: Hex perforated metal screen, damped, charcoal-grey foam covering
- Connector: EP-4 male, EP-5 male (Europe only), Pyle National (optional)
- Rigging (optional): Aircraft pan fittings, 600 lbs. safe working load each
- Transducers:
- M-3A Control Electronic Unit
- Input Type: Balanced ISO-Input,™ 10k ohms
- Output Type: Active, push-pull, 200 ohms output impedance
- Maximum Input Level:
- Balanced: +23 dBu
- Unbalanced: +23 dBu
- Maximum Output Level:
- Balanced: +26 dBu
- Unbalanced: +20 dBu
- Hum and Noise: -90 dBV
- Dynamic Range: >110 dB
- Sense Inputs: 10K ohms true differential, opto-isolated
- Electrical Crossover Frequency: 800 Hz
- High Frequency Delay Type: Active all-pass
- Driver Protection Circuitry:
- Low Frequency: RMS limiter
- High Frequency:
- RMS limiter
- VHF Peak limiter
- Indicators
- Sense; Hi and Lo: Green/ Red LEDs
- Limit; Hi, Lo, and VHF: Red LEDs
- Safe: Green LED
- Power: Green/Red LEDs
- Controls:
- Front Panel: Input attenuator, AC power switch
- Preset Panel:
- Lo Cut switch, Safe switch, HF EQ Switch
- VHF Var/Cal switch, VHF control
- Connectors:
- Balanced Input/Output: 3-pin XLR (A-3) female/male
- Sense Inputs: Banana jacks
- Power 120/240V AC, 50/60 Hz (internally switchable)
- Physical Dimensions: 19″ W x 1 3⁄4″ H x 7 3⁄4″ D, Standard rack mount
- Weight: 8 lbs. (3.6 kg)
