Panasonic PT-RZ470UK 3.5K DLP 16:9 Video Projector
Panasonic PT-RZ470UK 3.5K DLP 16:9 Video Projector
Entry Solid Shine LED/laser combined projector Ideal for use in education, corporate or digital signage
Features:
- LED/ Laser 1-chip DLP, 3500 lumens, Full HD
- LED/Laser light source enables up to 20,000 hours of maintenance free usage
- DIGITAL LINK connectivity
- System expandability with portrait mode installation capability and edge Blending
- 20,000:1 contrast ratio
Specifications:
- Power supply: 100-240 V AC, 5.2-2.0 A, 50/60 Hz
- Power consumption: 460 W (470 VA) (250 W with LIGHT POWER set to NORMAL, 200 W with LIGHT POWER set to Ecosave1, 178 W with LIGHT POWER set to Ecosave2. 0.5 W with STANDBY MODE set to ECO, 8 W with STANDBY MODE set to NORMAL)
- DLP™ chip Panel size: 16.5 mm (0.65 in) diagonal (16:9 aspect ratio)
- DLP™ chip Display method: DLP™ chip x 1, DLP™ system
- DLP™ chip Pixels: 2,073,600 (1,920 x 1,080) x 1, total of 2,073,600 pixels
- LENS: Manual zoom (2.0x), manual focus, F 2.0 – 3.4, f 21.5 – 43.0 mm
- Throw ratio: 1.46-2.94:1
- Light source: LED/Laser-combined (R, B: LED; G: Laser diode)
- Screen size: 1.02 – 7.62 m (40 – 300 inches) diagonally, 16:9 aspect ratio
- Brightness: 3,500 lumens
- Center-to-corner uniformity: 90%
- Contrast: 20,000:1 (full on/off)
- Resolution: 1,920 x 1,080 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,080 pixels.)
- Scanning Frequency (HDMI/DVI-I (Digital)): fH: 27-100 kHz, fv: 24-120 Hz, dot clock: 25-162 MHz
- Scanning Frequency (DVI-I (Analog)/RGB): fH: 15-100 kHz, fv: 24-120 Hz, dot clock: 162 MHz or lower
- Scanning frequency YPBPR (YCBCR): fH: 15.75 kHz, fV: 60 Hz (480i(525i)) fH: 15.63 kHz, fV: 50 Hz (576i(625i)) fH: 31.50 kHz, fV: 60 Hz (480p(525p)) fH: 31.25 kHz, fV: 50 Hz (576p(625p)) fH: 45.00 kHz, fV: 60 Hz (720(750)/60p) fH: 37.50 kHz, fV: 50 Hz (720(750)/50p) fH: 33.75 kHz, fV: 60 Hz (1035(1125)/60i) fH: 33.75 kHz, fV: 60 Hz (1080(1125)/60i) fH: 28.13 kHz, fV: 50 Hz (1080(1125)/50i) fH: 28.13 kHz, fV: 25 Hz (1080(1125)/25p) fH: 27.00 kHz, fV: 24 Hz (1080(1125)/24p) fH: 27.00 kHz, fV: 48 Hz (1080(1125)/24sF) fH: 33.75 kHz, fV: 30 Hz (1080(1125)/30p) fH: 67.50 kHz, fV: 60 Hz (1080(1125)/60p) fH: 56.25 kHz, fV: 50 Hz (1080(1125)/50p)
- Scanning Frequency (Video): fH: 15.75 kHz, fV: 60 Hz (NTSC/NTSC4.43/PAL-M/PAL60); fH: 15.63 kHz, fV: 50 Hz (PAL/PAL-N/SECAM)
- Optical axis shift Vertical: +73%, -48% (manual), Horizontal: +27%, -35% (manual)
- Keystone correction range: Vertical: ±40°
- Installation: Ceiling/floor, front/rear
- Terminals HDMI IN: HDMI 19-pin x 1 (Deep Color, compatible with HDCP); 480p(525p), 576p(625p), 720(750)/60p, 720(750)/50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p, VGA(640 x 480) – WUXGA(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz, audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
- Terminals DVI-I IN: DVI-I 29-pin x 1
- Terminals DVI-I IN Digital: DVI 1.0 compliant, HDCP compatible, for single link only; 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA(640 x 480) – WUXGA(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz
- Terminals DVI-I IN RGB: R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: TTL, high impedance, positive/negative automatic; NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
- Terminals DVI-I IN Y, PB, PR (Y, CB, CR): Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
- Terminals COMPUTER (RGB) IN: D-sub HD 15-pin (female) x 1
- Terminals COMPUTER (RGB) IN R, G, B: R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: TTL, high impedance, positive/negative automatic; NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
- Terminals COMPUTER (RGB) IN Y, PB, PR (Y, CB, CR): Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
- Terminals VIDEO IN: RCA pin x 1, 1.0 Vp-p, 75 ohms
- Terminals AUDIO IN: M3 (L, R) x 1, 0.5 Vrms
- Terminals AUDIO OUT: M3 (L, R) x 1 (monitor out: 0-1.8 Vrms, variable)
- Terminals SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
- Terminals LAN/DIGITAL LINK: RJ-45 x 1 for network and DIGITAL LINK (video/audio/network/serial control) connection, 100Base-TX, compatible with PJLink™, HDCP compatible, Deep Color compatible, 480p(525p), 576p(625p), 720(750)/60p, 720(750)/50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p, VGA(640 x 480) – WUXGA(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz
- Terminals 3D SYNC OUT: Mini DIN 3-pin x 1, for 3D transmitter connection
- Power cord length: 3.0 m (9 ft 10 in)
- Cabinet materials: Molded plastic
- Dimensions (W x H x D): 455 x 137 x 415 mm (17-29/32 x 5-13/32 x 16-11/32 inches) (lens incuded)
- Weight: Approx. 11.0 kg (24.3 lbs)
- Operation noise: 35 dB (LIGHT SOURCE MODE: NORMAL), 29 dB (LIGHT SOURCE MODE: LOW)
- Operating temperature: 0℃ – 45℃ (32℉ – 113℉)
- Operating humidity: 20% – 80% (no condensation)
- Technology: 1-chip DLP LED/ Laser
