QSC E15 15-Inch 2-Way Passive Speaker
QSC E15 15-Inch 2-Way Passive Speaker
The E15 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8″ compression driver attached to the 75° DMTTM waveguide assures that even distant listeners will be well covered.E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete QSC entertainment system, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.
Features:
- High output, professional quality sound with E15 – 500 W continuous power
- E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
- Titanium diaphragm for high fidelity and long life
- Rugged tour-grade textured paint
- Foam-lined perforated steel grill
- Available U-Style Yoke and M8 rigging kit for permanent installation
- Dual angle pole socket
- Configuration: 1 x 15-inch, 2-way, non-powered
- Frequency Range (-10 dB): 59Hz – 20kHz
- Coverage Angle:75° conical
- Power capacity continuous/peak:500 W / 2000 W
- Sensitivity: 97dB, 1W@1m
- Output (peak SPL @ 1 m):131dB
- Driver LF: 380 mm (15-inch) driver with 76 mm (3.5-inch) voice coil
- Driver HF 38 mm (1.5-inch) exit, 76 mm (2.8-inch) voice coil, compression driver
- Nominal Impedance: 8 ohms
- Cross-over: Full-range only 1.55kHz
- Input connectors: 2x NL4, 1 barrier strip
- Enclosure: Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining.
- Mounting and suspension: 6x M8 suspension points, dual angle, 35mm pole-socket
- Net weight: 31 kg / 68 lbs
- Dimensions: 420x716x445mm (16.5×28.2×17.5in)
